The limits read `wall_segments`, so a document older than the catalogue
reports no walls at all — and therefore no violations, whatever its geometry.
Comparing that raw baseline against a candidate the card had already migrated
counted every inherited violation as new, and a legacy plan could not take an
unrelated edit at all: renaming a room was refused with junction_limit_angle.
Spec §3 forbids exactly this, and the frontend had already learned the same
lesson in 4758767e; the backend mirror simply never got the second half.
validate_junction_limits now runs both documents through
commit_wall_segment_model before counting. A document that cannot be migrated
is not this validator's verdict — the wall-model barrier owns that error and
reports it with its own code — so it degrades to "no baseline to inherit".
The regression is pinned twice: a test that asserts the legacy baseline reads
clean raw and carries the apex once migrated, and the mutant
junction-limit-backend-raw-baseline. Both fixtures that exercise the barrier
were rebuilt as real documents (rooms plus walls), because the previous ones
put walls in wall_segments with no rooms and did not survive migration.
Issue: #329
User-Visible: no
The branch was rebased onto the extracted resize controller (#264), which
changes the source fingerprint the documentation screenshots are pinned to.
The images themselves are byte-identical — only the recorded fingerprint moves.
Issue: #329
User-Visible: no
custom_components/houseplan/junction_limits.py repeats П1-П4 for the write
barrier in websocket_api, counting per rule so an inherited violation still
round-trips, and raises JunctionLimitError with the stable code
junction_limit_<rule>.
П5 is deliberately not mirrored — it judges the rendered wall bodies, and a
second mitre/inset pipeline in Python would drift more dangerously than the
rule it guards. Optimize stays outside the check for the same reason migration
and import do: it repairs existing geometry.
test_parity_with_the_frontend_checks feeds identical fixtures to the TS
functions and to this module and demands the same verdict, so the two
implementations cannot silently diverge.
Issue: #329
User-Visible: no
Measured what Resize itself already forbids: a room cannot be squeezed below
30 cm (two 15 cm walls), so П3 and П5 are unreachable through shrinking and
the gate merely fails closed there. П4 IS reachable on a fine grid, so the
smoke drags a real handle on a 2 cm grid: two rooms 10 cm apart, a 6 cm pull
would leave 4 cm between foreign nodes, the wall stops at 6 cm and exactly one
toast names the 5 cm rule.
Spec revision 6 records both the measurement and the two corrections it forces
on AC7a: a dimmed handle cannot express a per-step limit, and the plan is NOT
byte-unchanged — the allowed part of the gesture is a legitimate edit.
Issue: #329
User-Visible: no
П3 measures the WALL, not the catalogue atom: a short filler segment that
compensates a thickness step (owner's fixture, 5 cm = (30-20)/2) is a legal
continuation of a long same-thickness wall, so the rule walks the maximal
collinear run through the shared nodes before judging the length.
Resize stops at the last allowed position and names the broken rule instead
of the generic "geometry cannot be saved"; the Thickness dialog refuses
through its own toast. Both channels are pinned by demo/smoke_junction_limits
plus three mutants (angle threshold, write barrier, degenerate apex bevel).
Issue: #329
User-Visible: yes
Owner report: small serrations remained on the outer edges between the inner
and the outer vertex. Measured on the fixture ring: two ~4 cm steps plus four
micro-vertices at the tip. Their source was the inset contour's two-point
bevel folding into a bow-tie, and the earlier half-plane clip of that fold,
which left a 0.2 cm sliver the boolean union turned into steps. The inset now
ends in ITS own mitre point at a degenerate apex — mirroring the sharp outer
tip — so there is no fold to clip and no sliver to smear: the room ring is
exactly three vertices, every side longer than the half depth. The clip
helper and its cap plumbing are gone. The user-visible wording of this work
already stands in both changelogs from the #329 entry.
Issue: #329
User-Visible: no
The baseline for inheritance was the raw previous document, which for a
legacy space carries no wall catalogue at all — so every inherited short
segment of a real plan looked new and the resize smoke's legitimate write was
refused (executed: two 5 cm segments against their own 30 cm thickness).
Both sides now cross commitWallSegmentModel first, and inheritance is counted
per rule rather than per subject, because a structural write re-keys the
carriers it re-atomises.
Issue: #329
User-Visible: no
Owner correction (chat, 2026-08-27): no flat chamfer at the tip — a plain
sharp apex. Proven by execution on the issue fixture: the outset contour fell
back to a two-point bevel (the 4·h mitre limit against an 87 cm reach) while
the inset contour folded into a bow-tie, and subtracting that fold carved the
V-notches — together they made the trident. Now a degenerate corner (below 15
degrees, inner faces meeting inside both walls) contributes ONE outset point
at the plan's own vertex — no bevel, no metres-long mitre needle — and its
inset is clipped at the convergence line so no fold is subtracted. Plain and
merely sharp pairs keep the full mitre of #310. The write-side limits of
П1-П5 stop new plans from creating such corners at all.
Issue: #329
User-Visible: yes
A stable body aggregates the changelog since the previous STABLE release,
not since the last beta; in-beta-only bugfixes are excluded by the curator
(the draft lists every candidate with its source section); the small-fixes
filler line is legal only when the range carries user-visible work not
itemised in the body — a single-issue hotfix ships without it, and body
bullets must link their issues so the rule stays checkable.
scripts/release-notes.mjs prints the aggregation draft and verifies
docs/RELEASE-NOTES.md (npm run release:notes -- <tag> [--verify]); the
verifier rejects the v1.68.1-style empty filler by execution. STATUS.md
release mechanics updated in the same commit.
Issue: #328
User-Visible: no
Owner-approved emergency stable hotfix; the release commit changes only version fields, generated bundles and release metadata.
Issue: #324
User-Visible: yes
CODE-REVIEW-323-r1 M1: the full guides README links to still taught the
custom-repository flow; step 1 now matches the README wording.
Issue: #323
User-Visible: no
The HACS row still described an open queue of 835 PRs; the fresh-install
checklist still started from a custom repository.
Issue: #323
User-Visible: no
Package the two beta.3 write-blocker fixes: the model-upgrade stale-client
guard and the self-resolving zero-wall migration.
Issue: #316
Issue: #319
User-Visible: yes
Codex