- HP-1501-01: v1.50.1 bounded layout positions and left room rectangles,
polygon vertices, view_box and opening coordinates on bare _finite — the
same absurd-magnitude failure, one schema over. _GEOM (±4) covers them all
now, opening angles get ±360. And because a store may already hold such a
vertex from before the door existed, contentBounds applies its canvas
envelope to room geometry exactly as it does to device positions: the
point renders where it is, the frame ignores it, a space of nothing but
absurd points falls back to the whole canvas.
- HP-1501-02: a repair matching zero positions answered ok/moved:0 and
replaced the one-deep backup with an empty one — a typo right after
repairing the wrong space destroyed the promised way back. Empty match is
nothing_to_repair now: no write, no revision bump, backup intact.
Old test fixtures carried view_box [0,0,100,100] from the render-unit days;
they now use the normalised box the product actually stores.
Owner's batch (committed to dev earlier today, released here):
- devices count as content for the default zoom;
- the editor no longer shifts the plan — the stage measures its own top
instead of assuming 118px of header;
- zoom goes out to 0.4x, centred.
From the review:
- HP-1490-01: the square-canvas migration wrote two stores in sequence, and
the first write deleted the aspects the second needed — a crash between
them stranded the layout in the old coordinates with nothing able to
finish it. The intent {space: old aspect} is durable now: saved to the
layout store before anything moves, cleared by the same write that stores
the migrated layout, each half idempotent behind its own trigger. The
update event fires only after both halves are on disk. Proven at the exact
crash boundary by a harness test that fails the layout write once.
- HP-1490-02: check_quota and the file write were two executor jobs with
nothing between them, so N parallel uploads all measured the store before
any of them wrote. One job under a dedicated upload_lock now — narrower
than write_lock on purpose, a directory scan must not stall config saves.
A failed write reserves nothing.
- HP-1490-03: the content frame fed pan, zoom, clamp AND pointer maths, so
the editors were boxed into yesterday's drawing. Edit modes measure from
the full square; mode switches refit rather than carry a view clamped
against the wrong base.
- HP-1490-04: Save could outrun the proportions read and ship the previous
file's ratio. Picking a plan clears it immediately; Save awaits the
bounded read and stores 'unknown' over a lie.
- §5: package-lock version synced, duplicated comment removed.
New: smoke_audit_1490.mjs, migration crash-recovery pure + harness tests,
parallel-quota harness test. Inventory: 138 unit / 49 pure / 40 harness / 64
smokes.
Owner's batch:
- zoom now opens on what is DRAWN (rooms + 5% margin) for spaces with no
background image; with one the image is the plan and still fits whole. A small
plan on the square canvas no longer opens as a speck.
- swiping between spaces, and the kiosk carousel, slide sideways; honours
prefers-reduced-motion.
- the room settings button reads 'Room settings' and lightens on hover.
- 'curation' is filtering everywhere: UI strings, docs, code.
Checked the yard while I was there: its drawing sits off-centre because it was
drawn that way — before the migration x spanned 0.12..0.54 with 0.12 and 0.46 of
margin. The migration added 0.1465 on each side, symmetrically. Content-fit zoom
makes it moot anyway.
From the v1.47.0 review:
- HP-1470-02: the picker let you delete the plan you had just selected — it is
not in the stored config yet, so the server rightly called it free, and the
save then stored a url with no file. The button is disabled, and since two
clients can do this in either order, config/set now verifies every internal
plan url against the disk under the write lock and answers .
External and legacy urls are not ours to police.
- HP-1470-01: growth is bounded at the door rather than by deleting old files —
that mistake cost real plans twice. check_quota refuses an upload that would
push the store past 256 MB / 200 plans (1 GB / 1000 attachments) or leave less
than 512 MB free. The plan list is capped at 60 newest with a total, and
thumbnails load lazily.
- HP-1470-03: picking a saved plan waited for nothing and stored a fallback
ratio when the signature had not arrived — a square plan came out stretched.
It waits for the signature, binds the result to the dialog that asked, and the
dialog preview is signed too.
- report §5: the last lifecycle comments still described age-based collection.
Not released yet — the owner asked for a release once the batch is done.
Seen on the live instance: in the editors the dot grid covered only part of the
canvas. The grid is drawn over the space's view_box, and I transformed that box
along with everything else — so it still described the old plan area, and the
margins the square canvas had just added were outside it. Nothing to draw on,
which is precisely the room the change exists to give.
The viewport is now reset to the full square. It is also what 'fit to screen'
fits, so the whole canvas is reachable.
A space carried an aspect ratio, and coordinates were normalised against it: x
by the width, y by the height. Every geometric question therefore depended on a
per-space number, and picking a canvas orientation was a decision the user had
no reason to make. The render space is now NORM_W x NORM_W and a plan image is
fitted into it by its OWN ratio, centred — wide plans get margins above and
below, tall ones at the sides.
Migration (geometry_migration.py, pure and unit-tested) runs once at setup under
the write lock. Nothing about a drawing changes: the old box is padded out to a
square and every coordinate re-expressed against it — rooms as rects and
polygons, openings and their lengths, decor, view_box, and the marker positions
in the separate layout store. In render units it is a uniform scale plus an
offset, so angles and proportions are exact. cell_cm is scaled for tall plans,
because the grid pitch is a fraction of the width: without it a wall would
measure less than it does.
is now dropped by the schema rather than accepted — a stale tab sending
it would be sending coordinates from the old normalisation too, and honouring
the field would not make them right.
The demo fixture was migrated with the same transform, so the smokes exercise
the new geometry rather than a square-native fake; six of them needed their
render-space helpers updated and one its click coordinates.
Not released — dev only, per the owner's instruction.
The strengthened race test earned its keep on the first run: the sweep deleted
an aged 'rejected upload' while a save was committing a reference to it, and the
accepted config came out pointing at nothing. The write lock serializes the two
but cannot help when the sweep goes first.
So the age rule is gone for plans and for marker folders. What remains is one
sentence: a file goes when an action says so — a plan replaced, an attachment
dropped from a device that still exists — plus a per-dialog staging folder after
an hour, which by construction can only hold an upload nobody saved.
Cost: an upload whose save failed sits there until someone removes it by hand.
That is the side of the trade the owner picked, and it is the side that cannot
lose data.
v1.46.4 and v1.46.5 documented that detaching a plan leaves the image on disk,
added guards for it, and shipped tests. The guards were never reached: they sit
behind 'not superseded', and a file that left the configuration was called
superseded. From old_refs - new_refs alone, replacing a plan, detaching one and
deleting its space are indistinguishable — so all three deleted the file, at the
moment of the save, before any scheduled pass ever ran.
Every test I wrote for this called collect_plans(d, cfg, cfg): old config equal
to new, i.e. only the scheduled pass. The transition that mattered was never
exercised. Codex reproduced it in four lines.
Classification is by owner now:
space in both, plan A -> plan B : the user picked another image -> removed
space in both, plan -> none : detached -> kept
space gone : kept (the image was imported; a thirty-day
grace measured from file age is meaningless
anyway, it was uploaded months ago)
space has a plan, other file : rejected upload -> 1 h
Attachments follow the same shape: dropped from a device that still exists ->
removed (a trash button promises nothing); device gone -> kept; staging folder
-> 1 h.
Tests: a matrix per rule in the pure module, and — the part that was missing —
test_detaching_a_plan_keeps_the_file, which goes through real config/set calls:
attach, detach, assert the file is there, restart, assert again, re-attach,
replace, assert the replaced one is gone, delete the space, assert the plan
survives. Also strengthened the sweep/save race test to assert the save actually
succeeded and the config points at the specific expected file, per the report.
Owner's decision after the incident: a detached plan is never deleted, at any
age. v1.46.4 gave it a month; this makes it permanent and, more importantly,
writes the reasoning where the next change will trip over it — docs/SCOPE.md now
carries the standing rule. The component may delete a file only when a user
action says so. 'Nothing points at this any more' is not such an action, because
the two errors are not symmetrical: wasted disk is visible, cheap and
reversible; a deleted file is none of those.
Went through every other automatic deletion with the same question. One more
was wrong: houseplan/files/cleanup rmtree'd whatever folder the card named. A
partial migration leaves urls pointing into it — files/migrate deliberately does
not rewrite the ones it could not confirm — so those were live links to files
being deleted; and a wrong or stale id from any client destroyed a live device's
manuals. The server now reads the stored config under its lock and removes only
what nothing references, keeping the rest and saying so.
Also: a plan of a DELETED space now waits thirty days rather than an hour.
Deleting a space is deliberate; an hour is a short window to notice a misclick.
The rest came out clean: layout/delete and marker/room/space removal are all
confirm-guarded user actions, upload temporaries are never user-visible, and
dropping legacy 'segments' is a documented migration.
Protecting every file of a live space also protected the ones a commit had just
superseded, and gave rejected uploads immortality. The distinction that matters
is narrower: a space with NO plan_url has had its image detached and may want it
back; a space that has one can only be holding its own rejects. Attachments:
staging folders keep the hour, marker folders get the month.
Also: the layout event test asserted the order of separately fired bus events,
which nothing promises — it came back [2,1,3] in CI.
Deployed v1.46.3 to my own instance, restarted, and the startup sweep deleted
both floor plans: config/houseplan/plans/ went from f1.svg + f2.png to empty.
The backup is a SecureTar, so they are gone.
The rule was wrong, not the code. v1.46.0 introduced collection that treats
'nothing references this right now' as abandoned and gives it an hour. But
detaching a plan — switching a space to 'draw' — is a normal, reversible action,
and the editor's own comment says the file stays on disk. Those two plans had
been detached for weeks; every pass since v1.46.0 was entitled to remove them,
and the one that finally ran did.
New rule, one for every path:
* superseded by a commit (was in the old revision, is not in the new) — goes
immediately; that is the one thing a commit knows for certain;
* belongs to a space or marker that still exists — never collected, at any
age, because unreferenced is not abandoned;
* a per-dialog staging folder (up_*) — one hour, unchanged: by construction it
only ever holds an upload from a dialog that was never saved;
* anything else — thirty days.
The flag I added an hour ago is gone with it: two rules for the same
question is how this happened. Tests updated to the new grace, plus two that pin
the distinction directly.
I am sorry about the files.
HP-1460-01: v1.46.0 stopped overwriting attachments, but picking a free name
and taking it were two steps. Two uploads racing between them agreed on the
same name, both answered 200, and one set of bytes replaced the other;
files/migrate had the same check-then-copy gap. reserve_filename now claims the
name with O_CREAT|O_EXCL as it picks it, and both paths use it. It also splits
the extension off the RAW name and budgets the stem against MAX_FILENAME
including the collision tag — a maximal name lost its '.pdf' and then grew past
the limit, so the view sanitised the request back to a different name and the
attachment 404'd for good.
HP-1460-02: cleanup lived in an 'except Exception', which CancelledError walks
past, only one tmp_path was tracked, promotion had no finally, and the
collector only walks marker folders — an aborted transfer stranded a .upload-*
that nothing would ever remove. An outer finally owns every temporary, a second
'file' part is refused, promotion failure cleans up, and sweep_upload_temps
runs at setup, daily, and inside the commit-scoped collector. Chunks are
batched to 1 MB per disk task instead of one per 64 KB.
HP-1460-03: the layout event reached the static card and not the full one, so
two full cards diverged until a reload. The full card subscribes now and
re-reads ONLY the layout, keyed on its revision. Two hazards handled: it
records revisions it produced itself, and the reaction is deferred ~200 ms
because the event can beat the reply to our own write over the same socket;
positions dragged but not yet sent are flushed and merged on top, so a fix for
a stale UI cannot become a lost drag.
Tests: smoke_layout_sync (fails on a v1.46.0 build), four pure tests for atomic
reservation incl. 20-thread concurrency and the length boundary, a backend test
walking every failing exit path of an upload, and — as the report asked — an
HA-harness test that a repair issue disappears with its space.
Docs: CHANGELOG.md + CHANGELOG.ru.md + ARCHITECTURE.md + TESTING.md + STATUS.md.
unique_filename produced 'manual (2).pdf'; HouseplanContentView sanitises the
name in the REQUEST too, turning ' (2)' into '_2_', so the file was written and
then 404'd. The same pattern was already in files/migrate, so a rebind that hit
a name collision has been producing dead links. Both use the shared helper now,
with '-2', which round-trips sanitize_filename — asserted.
HP-1454-01 (high, release blocker): an uploaded SVG plan opened directly is a
top-level document of Home Assistant's own origin, so a <script> inside it
reaches the session's localStorage and API. Uploading needs write access, which
by default every authenticated user has. SVG responses now carry a sandbox CSP;
only SVG, because a CSP on a PDF can break the browser's viewer and a raster
image has nothing to disable. Verified in Chromium both ways: the script runs
without the header and does not with it.
HP-1454-02: attachment uploads wrote straight to <marker>/<filename>, outside
the config transaction — a cancelled dialog or a rejected save left the stored
url serving new bytes, and every new icon shared one 'new' folder, so two of
them attaching manual.pdf pointed at one file. Uploads take a free name, a new
icon gets a per-dialog staging folder promoted on an accepted save, and
config/set collects superseded and aged-orphan attachments like it does plans.
HP-1454-03: the debounce spaced out the starts of a write, not the writes. A
save slower than 500 ms let the next edit go out with the same expected_rev;
the server accepted the first, rejected the second, and the conflict handler
reloaded over the local copy. Writes are chained now — one in flight, each with
the revision the previous returned.
HP-1454-04: _openPairsCache keyed on room ids and links only, so an aspect
change or a dragged vertex left open boundaries and their glow cuts at old
coordinates. It keys on the rendered model object now — the same invalidation
the model cache already has, not a second strategy. The fingerprint also gained
an O(1) geometry roll-up per room.
HP-1454-05: outer collections were capped, inner ones were not. Limits for
poly points, open_to, controls, pdfs, text and url lengths, plus a total
serialized size cap; legacy is dropped server-side.
HP-1454-06: upload streams to a temp file and downloads use FileResponse, so a
50 MB manual no longer costs ~100 MB of RSS per transfer.
HP-1454-07: spaceModels() dropped room.settings, so the static card ignored the
per-room fill override. HP-1454-08: layout had no revision on point-wise writes
and no event, leaving static cards stale forever; it now keeps a revision,
returns it and fires houseplan_layout_updated. HP-1454-09: repair cleanup only
walked existing spaces, so a deleted space kept its warning. HP-1454-10:
serialize-javascript pinned past two advisories.
Tests: smoke_svg_sandbox (proves both directions), smoke_config_writer and
smoke_render_parity (both verified failing against a v1.45.4 build), six pure
tests for attachment collection and inner limits, four HA-harness tests for the
CSP, non-overwriting uploads, the size cap and layout revisions.
Docs: CHANGELOG.md + CHANGELOG.ru.md + ARCHITECTURE.md + TESTING.md + STATUS.md.
The device editor has offered display='value' since v1.26.0; MARKER_SCHEMA
accepted only badge/ripple/icon_ripple. Picking it produced
not a valid value for dictionary value @ data['config']['markers'][n]['display']
and since one rejected marker fails the whole config write, the user could not
save the plan at all until the setting was undone. Reported by @RemyRoux with
the exact error text, 2026-07-27 — a year and a half after the feature shipped.
The schema now accepts it, and the class of bug is closed rather than the
instance: DISPLAY_MODES, TAP_ACTIONS, SPACE_FILL_MODES and ROOM_FILL_MODES are
exported from src/logic.ts, the editors render their options from them, and a
backend test parses those lists out of the TypeScript source and asserts the
schema accepts every one (and rejects a bogus value). Reverting the one-word
schema fix fails that test, which is the check that was missing.
Plus an HA-harness test saving a config that contains a value-display marker —
the exact call the user's card was making.
Docs: CHANGELOG.md + CHANGELOG.ru.md + TESTING.md + STATUS.md.
R4-1: collecting superseded plan files runs after the configuration is already
durable, but an error listing the directory propagated out of config/set. The
client saw a failure for a revision the server had committed, and its retry
came back as a conflict. collect_plans now reports 0 instead of raising, and
config/set logs and proceeds — the event fires, the revision is returned.
R4-2: the pending set was cleared when a batch went out, not when it came back,
so every render during an in-flight content/sign queued another request: six
calls where one was needed, and unbounded on a socket that is slow rather than
busy. Queued and in-flight are separate states now; a failure backs off (2 s
doubling to 60 s) instead of retrying on the next frame; an in-flight entry
expires after 15 s so a promise that never settles cannot wedge retries; a late
answer after dispose() no longer renders.
Tests: test/signing.test.mjs — eight cases with hand-settled promises, verified
against a v1.45.1 checkout where four of them fail (2 sign calls instead of 1,
no backoff, a late answer rendering after teardown). Backend: a broken
collector still yields a successful save whose revision the next CAS accepts.
Pure collector: a disappearing directory returns 0.
Docs: CHANGELOG.md + CHANGELOG.ru.md + ARCHITECTURE.md + TESTING.md + STATUS.md.
R3-1 (high): v1.45.0 made the upload safe but left deletion to the client —
after a successful save the card asked the backend to remove everything but the
file it had just committed. Two open editors cannot be ordered: a delayed
request from one deleted the plan the other had just saved, leaving the
accepted configuration pointing at nothing, the exact damage copy-on-write was
introduced to prevent.
houseplan/plan/cleanup is removed. config/set collects inside its own write
lock from the two configurations that bracket the commit (plans.collect_plans):
a file the old revision referenced and the new one does not is superseded and
goes; any other unreferenced upload waits out PLAN_ORPHAN_TTL_S, because a
fresh one may belong to a transaction that has not committed yet. The collector
lives in a pure module so it can be reasoned about and unit-tested without the
HA harness.
R3-2: houseplan-space-card signed its plan url and threw the result away —
getCardSize() mutated a throwaway model while render() rebuilt its own from the
config, so the <image> requested the protected path and got 401 on every
render. Both cards now share ContentSigner (src/signing.ts), which also gives
the static card batching, expiry handling and periodic re-signing. is
released in finally: one failed request no longer wedges a url for the life of
the page.
Tests: five backend interleaving cases from the report, six unit tests for the
pure collector, smoke_space_card_bg (verified to fail against a v1.45.0 build:
the raw url reaches the DOM and no retry happens). 57 smokes, 124 unit, 22
backend-pure.
Docs: CHANGELOG.md + CHANGELOG.ru.md + ARCHITECTURE.md + TESTING.md + STATUS.md.
B2: the HTTP upload view failed OPEN when the config entry was
unavailable while the WS path failed closed — both now share one
may_write() policy helper (new auth.py) that denies non-admins when the
policy cannot be read.
B5: _finite now guards room rects, polygon vertices, view_box and
opening coordinates, not just layout positions; the declared
MAX_OPENINGS cap is finally enforced.
L4 (sub-item): every drag pipeline captures the pointer through the
tolerant helper (an inactive pointerId used to kill device/label/resize
drags); decor shapes gained a bounds clamp so they cannot be dragged far
outside the plan and persisted there.
+2 backend tests (16); both changelogs updated in this commit
L1: memoized space model + open pairs (structural fingerprint key, epoch
bumped synchronously at mutation time, not inside the debounce); hoisted
per-room geometry out of the render loop; smoke asserts zero recomputation
across state pushes.
L4: openings get the 3 px drag threshold used by every other pipeline and
only write when the geometry actually changed — taps open the dialog again.
G2: interiorPoint() replaces the vertex mean, so island rooms inside
concave (U/L) parents are accepted and their evenodd holes render; traced
duplicates still are not containment.
G3: segKey rounds before ordering — one shared wall, one key.
B2: _check_write fails closed when the entry is unavailable.
B3: layout/set honours expected_rev and returns the new rev.
B4: config/set without expected_rev over a non-empty store logs a warning.
B5: coordinates reject NaN/Infinity; spaces/rooms/markers/decor/layout capped.
+2 unit tests (118), +2 backend tests (14), smoke_render_perf; docs
same-commit
- fill_mode 'temp': below comfort → #4fc3f7, inside → #66d17a, above → #ffd45c;
bounds default 20-25°C, editable in the space dialog (visible only for this
mode), swapped bounds tolerated; rooms without a temperature reading unfilled
- areaTemp(): average of the area devices' temperatures
- tests: roomFillColor temp bands + bounds, spaceDisplayOf defaults, areaTemp,
backend schema (fill_mode temp + temp_min/temp_max); smoke_temp_fill.mjs
- TESTING.md updated in the same commit (policy)
- space dialog 'Display' section: room borders/names toggles, color+opacity,
fill by zigbee signal or lights (tri-state: on/off/no-lights)
- draggable room name labels persisted as layout rl_<roomId>
- 'no image, outline by hand' space source with canvas orientation; image
optional now; switching an existing space to draw detaches its plan
- demo/ synthetic-home harness lives in the repo (serve.mjs + smokes + icons gen)
- docs/TESTING.md checklist (same-commit update policy); self-run found and
fixed: plan_url not detached on image->draw, _stateClass crash on states
without entity_id; perf measured (162 devices ~14ms build)
- backend: SPACE_DISPLAY_SCHEMA validation (+test)
- All card UI strings moved to src/i18n.ts (en/ru); language follows the HA
profile automatically, new 'language: en|ru' card option forces it; GUI
editor localized and got the language dropdown; generated device names
localized via BuildCtx.loc.
- English-only codebase: comments, docstrings, test names, backend error
messages and logs. Russian remains only in the ru dictionary, ru.json,
iconFor regexes matching Russian device names (+their fixtures) and README.ru.md.
- Docs English-first: README (EN) + README.ru.md, ARCHITECTURE/DEVELOPMENT/
ROADMAP/CHANGELOG fully translated; translations/en.json had Russian - fixed.
- Removed obsolete RELEASE_NOTES_v1.9.3.md and scripts_publish.sh.
Matysh