Agreed with the owner: whether a device is on the plan is a CHECKBOX
('Hide device from plan', every kind incl. virtual), not a runtime
algorithm. The old filter survives only as the SEEDER of those flags.
- marker.hidden is the flag; hidden devices are BUILT (room LQI counts
them — owner's decision) but rendered only in the device editor with
'Show hidden' on, ghosted. They cast no glow and no light fill: an
invisible device casts no visible light (owner's decision).
- seedHiddenBindings(): non-physical devices (excluded domains, Group,
scene, bridge, myheat children, grouped lamps) in bound areas WITHOUT a
marker. The editing client materialises them into hidden:true stub
markers, sets settings.filter_seeded, retires settings.show_all, and
strips fresh-hidden ids from the red-dot list. Unticking the checkbox
keeps a hidden:false marker — the seeder never revisits a marked device,
so the user's decision is final. New non-physical devices hide silently;
physical ones keep the red-dot flow.
- legacy configs (no filter_seeded) keep the OLD behaviour verbatim —
runtime filter, shared show_all, hidden-means-gone — until an editing
client materialises them, so a read-only tablet never sees a half-state.
- 'Show all' is renamed 'Show hidden' and is LOCAL to the tab; the shared
settings.show_all retires with the runtime filter.
- 'Remove from plan' disappears for auto/entity devices (the checkbox is
the way); a virtual device's Delete remains a real deletion.
- docs/FILTERING.md is the source of truth for the mechanism.
Tests: seeder/seeded/legacy/lights units (146), smoke_hidden_flag with 12
assertions (68 smokes). Inventory: 146 / 51 / 43 / 68.
Research on the owner's install (verified live): the radiator heads that
glowed yellow were the ones with SCALE PROTECTION on, and the ones actually
heating stayed dark. Cause: the primary-entity search ran domains outside
tiers, and switch outranks climate — so a vendor's config switch (anti
scaling, child lock) became the device's primary, driving the color, the
icon morphing and tap-toggle alike.
The principle now: yellow = the device is doing its main job RIGHT NOW.
- primaryEntity: tiers outside, domains inside — a service entity never
beats the visible main function; a hidden lamp still beats a visible
config switch (grouped lights), and a plug's switch stays primary.
- climate joins the state table: yellow by hvac_action (heating/cooling/
drying/fan) — 'which radiators are heating', not 'enabled for winter';
the coarser state is only a fallback when the integration reports no
action.
- one truth for light: litLightEntity() is asked by BOTH the glow pool and
the icon color, in every fill mode — the pool and the icon can no longer
disagree. The 'is a light source' flag keeps counting controls first.
- README (en+ru): the color table, in words.
Tests: TRV + plug primary units, litLightEntity unit, smoke_yellow_principle
(heating yellow / idle dark / off dark / fallback / lit-light wins / forced
source). Inventory: 142 / 51 / 43 / 67.
R2-1 (high): plan replacement committed filesystem state before the config CAS.
The upload wrote the final name and unlinked the other extension, so a rejected
config write left the live plan already replaced — or the stored config
pointing at a deleted file. Uploads now go to <space>.<token>.<ext> and delete
nothing; houseplan/plan/cleanup runs only after the config write is accepted.
The '.' separator is load-bearing: a space id cannot contain one, so cleaning
'f1' can never reach the files of 'f1-attic'.
R2-2: the backend signs at most MAX_SIGN_PATHS (200) per request and ignores
the rest silently, while the card sent its whole cache in one call and trusted
any cached entry forever — past 200 attachments the later ones stopped being
refreshed and expired for good. Requests are chunked to the shared constant,
entries carry their issue time (aging urls keep rendering while a replacement
is fetched, expired ones are dropped), and the cache is pruned to urls the live
config still references.
R2-3: areaClimate() rescanned the whole registry per room and per measurement.
areaClimateMap() classifies once and returns Map<area,{temp,hum}>, memoized on
hass identity so fresh states are always observed. Smoke measurement: 133
registry scans per update with 44 rooms before, 2 after, flat in room count.
Also: smoke_ux_fixes wrote its screenshot to a hard-coded /tmp path and could
not run on Windows.
Tests: smoke_plan_upload_reject, smoke_sign_cap, smoke_climate_once (all fail
on v1.44.8), three backend tests for versioned plan names and cleanup scoping,
unit tests for chunk/referencedContentUrls and areaClimateMap.
Docs: CHANGELOG.md + CHANGELOG.ru.md + ARCHITECTURE.md + TESTING.md + STATUS.md.
After v1.44.5 read the area registry instead of visible icons, every hidden
temperature entity in the area became a candidate, including ones measuring
something other than room air. Verified against a live 60-area install: a NAS
processor temperature, kettle water, a 90 C sauna heater and a virtual
better_thermostat all leaked into room averages.
- areaClimate(): skip entity_category (diagnostic/config), skip EXCLUDED_DOMAINS
platforms, skip entity ids naming a non-air medium (water/coolant/flow_temp/
return_temp/target/setpoint/chip/cpu/processor/board/device_temp/batter/
freezer/fridge/oven/kettle/boiler).
- rules.ts: kettle/thermopot -> mdi:kettle, sauna/harvia -> mdi:hot-tub, so they
no longer fall through to the generic thermometer rule.
- test: all four real false positives asserted out, one real sensor left.
- docs: CHANGELOG.md + CHANGELOG.ru.md + STATUS.md snapshot.
- areaClimate() walks the HA registry for the area instead of the list
of VISIBLE icons: a thermometer hidden by curation or by the user was
silently dropped from the room card, tooltip and temperature fill
(field report). Curation still filters fridges/TRVs; the auto icon is
used on purpose so a custom marker icon cannot change what a device
measures; an explicit per-room source still wins
- room tooltip no longer says 'open the area' — room clicks were removed
in v1.40.1 (the link icon does it)
- +1 unit test (120); both changelogs updated
- four-tier principle fixed in ARCHITECTURE: global > space > room >
device, specific overrides general, unset inherits
- room.settings { fill_mode, temp_source, hum_source } with backend
schema; pure roomFillModeOf + sourceValue (+2 test suites, 114)
- gear on room cards in the Plan editor opens Room settings: rename,
re-area (current area included in the list), fill override (may opt
out of glow darkness), explicit temp/hum source with a searchable
device+entity dropdown; the same section in the creation dialog
- source feeds the room card, tooltip and temp fill; works for rooms
without an HA area (user-feedback case #1)
- smoke_room_settings.mjs (10 checks); TESTING/CHANGELOG/ARCHITECTURE
same-commit
- primaryEntity: tiered selection, domain priority beats hidden flag
(hidden light > visible config switch); visible same-domain still wins
- live-debugged on the real install: individual lamps hidden in the
registry (light group setup) got switch.*_do_not_disturb / identify
buttons as primary — tap toggle 'did nothing'
- +1 unit test (101); TESTING/CHANGELOG same-commit
- room label becomes a card: name on top, optional metrics below
(temperature / humidity / avg zigbee / lights), four checkboxes in
space settings, all off by default; lights render On/Off or '1 of 3'
- areaHum + areaLightStats pure helpers (+3 unit tests, 90 total)
- resize via corner handles in the Plan editor (hover), uniform 0.5-3x,
scale stored as layout k next to the position; drag preserves it
- fix latent v1.25 regression: draggable HTML labels were never rendered
in the Plan editor (static SVG only) — real name-only cards now render
there, draggable and resizable
- repair merge/split smokes still calling removed _toggleMarkup
- validation.py: 4 label_* bools; smoke_room_cards.mjs; docs same-commit
- fill_mode 'temp': below comfort → #4fc3f7, inside → #66d17a, above → #ffd45c;
bounds default 20-25°C, editable in the space dialog (visible only for this
mode), swapped bounds tolerated; rooms without a temperature reading unfilled
- areaTemp(): average of the area devices' temperatures
- tests: roomFillColor temp bands + bounds, spaceDisplayOf defaults, areaTemp,
backend schema (fill_mode temp + temp_min/temp_max); smoke_temp_fill.mjs
- TESTING.md updated in the same commit (policy)
- space dialog 'Display' section: room borders/names toggles, color+opacity,
fill by zigbee signal or lights (tri-state: on/off/no-lights)
- draggable room name labels persisted as layout rl_<roomId>
- 'no image, outline by hand' space source with canvas orientation; image
optional now; switching an existing space to draw detaches its plan
- demo/ synthetic-home harness lives in the repo (serve.mjs + smokes + icons gen)
- docs/TESTING.md checklist (same-commit update policy); self-run found and
fixed: plan_url not detached on image->draw, _stateClass crash on states
without entity_id; perf measured (162 devices ~14ms build)
- backend: SPACE_DISPLAY_SCHEMA validation (+test)
- 12-test buildDevices suite on a fake hass (curation, markers, groups, dedup,
icon rules, lock override, device_class fallback, primary/LQI/temp)
- t() substitutes all placeholder occurrences (pure subst() + regression test)
- _saveConfigNow resyncs config on rev conflict before rethrowing
- pointercancel clears the long-press timer (phantom info card on touch)
- repairs.py: plan-file check re-runs after every config save
- test build compiles devices.ts/types.ts; fix-test-build.mjs adds .js to ESM imports
Matysh