Release v1.61.0

custom_components/houseplan/const.py

@@ -45,7 +45,7 @@ PLAN_ORPHAN_TTL_S = 3600
 SCHEDULED_GRACE_S = 30 * 24 * 3600
 FILES_DIR = "houseplan/files"
 CONF_ADMIN_ONLY = "admin_only"
-VERSION = "1.61.0-beta.8"
+VERSION = "1.61.0"
 
 DEFAULT_CONFIG: dict = {
     "spaces": [],

custom_components/houseplan/manifest.json

@@ -16,5 +16,5 @@
   "issue_tracker": "https://github.com/Matysh/houseplan-card/issues",
   "requirements": [],
   "single_config_entry": true,
-  "version": "1.61.0-beta.8"
+  "version": "1.61.0"
 }

docs/CHANGELOG.md

@@ -2,6 +2,25 @@
 
 ## Unreleased
 
+## v1.61.0 — 2026-08-11
+
+- Expanded robot-vacuum integration coverage with deterministic source
+  selection, explicit capability and health diagnostics, gap-preserving trails,
+  safer map arbitration and stricter calibration checks.
+- Reworked room colour and lighting controls. Glow is an independent additive
+  overlay, room fills keep their exact configured colour, and each source can
+  use automatic, always-on or disabled behaviour with manual colour, brightness
+  and radius where applicable.
+- Light propagation now follows the same physical wall bodies drawn on the
+  plan, including wall thickness, jambs, partitions and columns. Doorways and
+  virtual boundaries transmit light without seams, while walls and corners cast
+  stable clipped shadows.
+- Returning to a tab, reconnecting Home Assistant or remounting the card keeps
+  the last coherent plan frame. Devices, rooms, Glow, sun, openings, vacuums and
+  live decorative text update atomically instead of flashing partial state.
+- Small fixes and improvements to dialogs, room hover, device markers, editor
+  stability, validation and release tooling.
+
 ## v1.61.0-beta.8 — 2026-08-11
 
 - Plan recovery now has one bounded two-second barrier: a stalled signature or

docs/CHANGELOG.ru.md

@@ -8,6 +8,26 @@
 
 ## Unreleased
 
+## v1.61.0 — 2026-08-11
+
+- Расширена поддержка роботов-пылесосов: детерминированный выбор источника,
+  понятная диагностика возможностей и состояния, сохранение разрывов маршрута,
+  безопасный выбор карты и более строгая проверка калибровки.
+- Переработаны настройки цвета комнат и освещения. Glow стал независимым
+  аддитивным слоем, заливки комнат сохраняют точный заданный цвет, а для каждого
+  источника доступны автоматический, постоянный и отключённый режимы с ручными
+  цветом, яркостью и радиусом там, где это применимо.
+- Распространение света теперь использует те же физические тела стен, которые
+  отображаются на плане, включая толщину, откосы, перегородки и колонны. Проёмы
+  и виртуальные границы пропускают свет без швов, а стены и углы формируют
+  стабильные обрезанные тени.
+- При возврате на вкладку, восстановлении соединения Home Assistant или remount
+  карточка сохраняет последний цельный кадр. Устройства, комнаты, Glow, солнце,
+  проёмы, пылесосы и живой декоративный текст обновляются атомарно без вспышек
+  частично собранного состояния.
+- Мелкие исправления и улучшения диалогов, hover комнат, маркеров устройств,
+  стабильности редакторов, проверок и процесса публикации.
+
 ## v1.61.0-beta.8 — 2026-08-11
 
 - Восстановление плана теперь ограничено общим двухсекундным барьером: зависшая

docs/RELEASE-NOTES.md

@@ -1,14 +1,18 @@
-<!-- release: v1.61.0-beta.8 -->
+<!-- release: v1.61.0 -->
 
 ## Основное
 
-- Возврат на вкладку и восстановление соединения больше не могут навсегда скрыть готовый план; все динамические данные обновляются одним согласованным кадром.
+- Улучшена поддержка роботов-пылесосов: выбор источника, диагностика, маршруты и калибровка стали надёжнее.
+- Переработаны Glow, заливки комнат и распространение света с учётом реальной геометрии стен, проёмов, перегородок и колонн.
+- Возврат на вкладку и восстановление соединения больше не показывают частично собранный план; динамические данные обновляются одним согласованным кадром.
 - Мелкие исправления и улучшения.
 
 ## Highlights
 
-- Tab resume and connection recovery can no longer permanently cover a complete plan; all dynamic data now updates as one coherent frame.
+- Improved robot-vacuum source selection, diagnostics, trails and calibration.
+- Reworked Glow, room fills and light propagation around real walls, openings, partitions and columns.
+- Tab resume and connection recovery no longer expose a partially rebuilt plan; dynamic data updates as one coherent frame.
 - Small fixes and improvements.
 
-[Полный список изменений на русском](https://github.com/Matysh/houseplan-card/blob/v1.61.0-beta.8/docs/CHANGELOG.ru.md)
-· [Full changelog in English](https://github.com/Matysh/houseplan-card/blob/v1.61.0-beta.8/docs/CHANGELOG.md)
+[Полный список изменений на русском](https://github.com/Matysh/houseplan-card/blob/v1.61.0/docs/CHANGELOG.ru.md)
+· [Full changelog in English](https://github.com/Matysh/houseplan-card/blob/v1.61.0/docs/CHANGELOG.md)

docs/STATUS.md

@@ -21,8 +21,8 @@ metadata). Only an explicit owner-approved emergency hotfix may skip this gate.
 
 | Item | State |
 |---|---|
-| Version | **v1.61.0-beta.8** everywhere (manifest, const.py, package.json, CARD_VERSION) — final prerelease candidate for the v1.61.0 stability release |
-| Current local cycle | v1.61.0-beta.8 completes the #73 review corrections. Full and compact cards use one bounded continuity barrier and immutable render-device snapshot, so a reconnect, delayed protected backdrop or ordinary HA tick cannot mix device, room, Glow, sun, opening, vacuum and live-text data from different frames or leave a complete plan trapped below an opaque recovery layer. Structural fingerprints ignore ordinary state ticks; reconnect semantics require a confirmed connection loss; signed-asset and shared-config races are bounded and retryable. The deterministic continuity smoke now exercises the production visibility listener and a fixture containing thick walls, openings, Glow, sun, decor, protected content and devices. `docs/LIGHT.md` remains canonical. |
+| Version | **v1.61.0** everywhere (manifest, const.py, package.json, CARD_VERSION) — stable promotion of the published and validated v1.61.0-beta.8 candidate |
+| Current local cycle | v1.61.0 promotes the tested beta series without product-source changes beyond the version constant. The release combines vacuum integration coverage, independent additive Glow and room-fill controls, geometry-based light propagation, and the #73 coherent-frame continuity contract. Full and compact cards use one bounded recovery barrier and immutable render-device snapshot, so reconnect, delayed protected backdrops and ordinary HA ticks cannot mix device, room, Glow, sun, opening, vacuum or live-text data from different frames. `docs/LIGHT.md` remains canonical. |
 | Workflow | Owner's rule since 2026-08-07: ordinary fixes/features are made **locally, without tests and without commits**. A requested pre-release gets a production build plus the smallest targeted unit/smoke set covering the changed surfaces, one tested `dev` commit/tag and a GitHub Release with `prerelease=true`; `main` stays untouched. The complete local frontend/backend/smoke gate runs only before a stable release, after which `main` is fast-forwarded to the exact tested `dev` SHA and the GitHub Release uses `prerelease=false`. Release bodies are short and bilingual (Russian first): only significant user changes get individual bullets, while minor/code-only work is grouped as `Мелкие исправления и улучшения` / `Small fixes and improvements`; every body ends with separate links to the Russian and English changelogs. Detailed RU/EN changelog bullets may link the corresponding closed GitHub Issues; open or partially delivered issues are never presented as shipped. Telegram announcements are sent only for stable releases; beta and RC publication is silent. `docs/RELEASE-NOTES.md` is the current canonical body instance; `npm run release:prerelease -- <tag> --issues=… --yes` is the primary local publication path and the manual `Publish prerelease` workflow is its GitHub-only equivalent once present on `main`. Nothing is copied to the home instance by hand |
 | GitHub | https://github.com/Matysh/houseplan-card — [Issues](https://github.com/Matysh/houseplan-card/issues) are the canonical task records and the linked [Project v2](https://github.com/users/Matysh/projects/1) is the canonical priority/status view; both must stay current. `main` carries stable releases; pre-release tags may point directly at `dev`. Work lands on `dev` and is merged into `main` for a stable release, so `dev` is normally equal to or ahead of `main`, never behind. Push via SSH key `ha_jb` (remote git@github.com:…); API releases via the fine-grained PAT in `~/.git-credentials` (Contents R/W, issued 2026-07-23) |
 | CI | Prerelease publication requires a green exact-SHA Validate: frontend/backend, smoke (including the #73 rAF frame sampler), golden, HACS/Hassfest and a short absolute-ceiling performance smoke. Obsolete same-ref Validate runs are cancelled. Full seven-sample base/candidate performance moved to `performance.yml` (`main` push, weekly, manual); stable release assets fail closed unless Validate and Full Performance are green for the exact tagged SHA and the stable-only CDP compositor screencast finds no empty/black presented frame. |

package-lock.json

@@ -1,12 +1,12 @@
 {
   "name": "houseplan-card",
-  "version": "1.61.0-beta.8",
+  "version": "1.61.0",
   "lockfileVersion": 3,
   "requires": true,
   "packages": {
     "": {
       "name": "houseplan-card",
-      "version": "1.61.0-beta.8",
+      "version": "1.61.0",
       "license": "MIT",
       "dependencies": {
         "lit": "^3.1.3",

package.json

@@ -1,6 +1,6 @@
 {
   "name": "houseplan-card",
-  "version": "1.61.0-beta.8",
+  "version": "1.61.0",
   "description": "Interactive house plan Lovelace card for Home Assistant",
   "license": "MIT",
   "type": "module",

src/houseplan-card.ts

@@ -163,7 +163,7 @@ import {
 import { renderOpeningTunnelFills } from './render/opening-tunnels';
 import { safeStoredColor } from './color';
 
-const CARD_VERSION = '1.61.0-beta.8';
+const CARD_VERSION = '1.61.0';
 /** Keeps every previously valid scale at the maximum 20 cm grid scale lossless. */
 const DECOR_TEXT_CM_MAX = 2000;
 const CELL_CM_MIN = 0.1;