build: prepare v1.68.0-beta.1 candidate

Package stable wall identity, wall junction polish and active-chain visibility. Issue: #282 Issue: #307 Issue: #309 Issue: #310 User-Visible: yes
2026-09-29 03:09:36 +00:00 · 2026-08-26 03:27:57 +03:00
parent b4cccfdf63
commit a78deb7ce7
11 changed files with 25 additions and 21 deletions
@@ -46,7 +46,7 @@ PLAN_ORPHAN_TTL_S = 3600
 SCHEDULED_GRACE_S = 30 * 24 * 3600
 FILES_DIR = "houseplan/files"
 CONF_ADMIN_ONLY = "admin_only"
-VERSION = "1.67.0-rc.3"
+VERSION = "1.68.0-beta.1"

 # Portable backup format.  This is deliberately independent from the Home
 # Assistant Store version above: storage migrations and files exported by a
@@ -16,5 +16,5 @@
  "issue_tracker": "https://github.com/Matysh/houseplan-card/issues",
  "requirements": [],
  "single_config_entry": true,
-  "version": "1.67.0-rc.3"
+  "version": "1.68.0-beta.1"
 }
@@ -2,6 +2,8 @@

 ## Unreleased

+## v1.68.0-beta.1 — 2026-08-26
+
 - Two walls meeting at an acute angle keep their full drawing point again —
  the #309 chamfer now applies only to nodes of three and more walls. The
  real tooth is gone instead: the deeper wall's butt end no longer pokes
@@ -8,6 +8,8 @@

 ## Не выпущено

+## v1.68.0-beta.1 — 2026-08-26
+
 - Две стены, сходящиеся под острым углом, снова сходятся в полное остриё —
  фаска #309 действует только в узлах из трёх и более стен. Вместо этого
  убран настоящий зубец: торец толстой стены больше не торчит вбок из грани
@@ -1,18 +1,18 @@
-<!-- release: v1.67.0-rc.3 -->
+<!-- release: v1.68.0-beta.1 -->

 ## Основное

- Стыки трёх и более стен больше не оставляют белых клиньев и зазубрин.
- Осевые линии и узлы стен теперь одинаково отображаются во всех инструментах редактора Плана.
- В свойствах проёмов контактные датчики и замки можно искать по имени и `entity_id`.
+- Структурные правки стен теперь сохраняют толщину и проёмы благодаря стабильным ID сегментов; старые планы обновляются атомарно.
+- Острые и многолучевые стыки стен больше не оставляют длинных зубцов, пиков и торчащих торцов.
+- При рисовании цепочки стен её ось и узлы остаются видимыми поверх кладки.
 - Мелкие исправления и улучшения.

 ## Highlights

- Junctions of three or more walls no longer leave white wedges or notches.
- Wall axes and structural endpoints are now shown consistently in every Plan editor tool.
- Contact sensors and locks in opening properties can be searched by name and `entity_id`.
+- Structural wall edits now keep thickness and openings attached through stable segment IDs; existing plans upgrade atomically.
+- Acute and multi-wall junctions no longer leave long teeth, peaks or protruding butt ends.
+- While drawing a wall chain, its axis and nodes remain visible above the masonry.
 - Small fixes and improvements.

-[Полный список изменений на русском](https://github.com/Matysh/houseplan-card/blob/v1.67.0-rc.3/docs/CHANGELOG.ru.md)
-· [Full changelog in English](https://github.com/Matysh/houseplan-card/blob/v1.67.0-rc.3/docs/CHANGELOG.md)
+[Полный список изменений на русском](https://github.com/Matysh/houseplan-card/blob/v1.68.0-beta.1/docs/CHANGELOG.ru.md)
+· [Full changelog in English](https://github.com/Matysh/houseplan-card/blob/v1.68.0-beta.1/docs/CHANGELOG.md)
@@ -21,8 +21,8 @@ metadata). Only an explicit owner-approved emergency hotfix may skip this gate.

 | Item | State |
 |---|---|
-| Version | **v1.67.0-rc.3 candidate** everywhere (manifest, const.py, package.json, CARD_VERSION) |
-| Current local cycle | v1.67.0-rc.2 is published. Current `dev` closes multi-wall junctions without wedges (#302), keeps the complete wall-axis/endpoint overlay identical across every Plan tool (#304), adds opening-entity search (#301), preserves import-reference lineage across repeated imports (#265), and renders wall-thickness hover at the real physical width (#303). v1.67.0-rc.3 packages these reviewed S8 changes and remains gated by the exact-SHA Validate before publication. |
+| Version | **v1.68.0-beta.1 candidate** everywhere (manifest, const.py, package.json, CARD_VERSION) |
+| Current local cycle | v1.67.0-rc.3 is published. Current `dev` stabilises persisted wall-segment identity and atomic model-v8 upgrades (#282), keeps active wall-chain axes visible (#307), corrects acute and multi-wall junction envelopes (#309/#310), and includes code-only stylesheet/process maintenance. v1.68.0-beta.1 packages the reviewed S8 product work and remains gated by exact-SHA Validate before publication. |
 | Hidden Labs Stage | #89 Stage 1 ships in v1.63.0-beta.1. #122 Stage 2 ships in v1.64.0 and evolves the same hidden, expiring `iso` experiment with matte walls, a low exterior floor edge, restrained shared shadows and live vertical door/window/gate panels. Flat remains default; editors and `houseplan-space-card` remain flat; live floor effects and HA actions remain unchanged. Public activation remains a separate task. |
 | Workflow | Superseded 2026-08-12: the pre-1.62 rule of "local edits without tests or commits" is **dead** — since release 1.62 every product change follows `PROCESS.md` (issue in `S5-ready`+, branch `issue/<NN>-slug`, trailers on every commit, review pipeline; `AGENTS.md` is the summary). Release mechanics below remain current. A requested pre-release gets a production build plus the smallest targeted unit/smoke set covering the changed surfaces, one tested `dev` commit/tag and a GitHub Release with `prerelease=true`; `main` stays untouched. The complete local frontend/backend/smoke gate runs only before a stable release, after which `main` is fast-forwarded to the exact tested `dev` SHA and the GitHub Release uses `prerelease=false`. Release bodies are short and bilingual (Russian first): only significant user changes get individual bullets, while minor/code-only work is grouped as `Мелкие исправления и улучшения` / `Small fixes and improvements`; every body ends with separate links to the Russian and English changelogs. Detailed RU/EN changelog bullets may link the corresponding closed GitHub Issues; open or partially delivered issues are never presented as shipped. Telegram announcements are sent only for stable releases; beta and RC publication is silent. `docs/RELEASE-NOTES.md` is the current canonical body instance; `npm run release:prerelease -- <tag> --issues=… --yes` is the primary local publication path and the manual `Publish prerelease` workflow is its GitHub-only equivalent once present on `main`. Nothing is copied to the home instance by hand |
 | GitHub | https://github.com/Matysh/houseplan-card — [Issues](https://github.com/Matysh/houseplan-card/issues) are the canonical task records; their labels carry priority and workflow status (`PROCESS.md` §9). GitHub Projects is no longer used. `main` carries stable releases; pre-release tags may point directly at `dev`. Work lands on `dev` and is merged into `main` for a stable release, so `dev` is normally equal to or ahead of `main`, never behind. Push via SSH key `ha_jb` (remote git@github.com:…); API releases via the fine-grained PAT in `~/.git-credentials` (Contents R/W, issued 2026-07-23) |
@@ -1,12 +1,12 @@
 {
  "name": "houseplan-card",
-  "version": "1.67.0-rc.3",
+  "version": "1.68.0-beta.1",
  "lockfileVersion": 3,
  "requires": true,
  "packages": {
    "": {
      "name": "houseplan-card",
-      "version": "1.67.0-rc.3",
+      "version": "1.68.0-beta.1",
      "license": "MIT",
      "dependencies": {
        "lit": "^3.1.3",
@@ -1,6 +1,6 @@
 {
  "name": "houseplan-card",
-  "version": "1.67.0-rc.3",
+  "version": "1.68.0-beta.1",
  "description": "Interactive house plan Lovelace card for Home Assistant",
  "license": "MIT",
  "type": "module",
@@ -317,7 +317,7 @@ import {
 } from './space-order';
 import { applyOpeningMoves, mergeCollinearPartitions, spaceMergeGeometry } from './wall-merge';

-const CARD_VERSION = '1.67.0-rc.3';
+const CARD_VERSION = '1.68.0-beta.1';

 type ResizeLiveLabel = {
  kind: 'length';