Plan-editor wall thickness (docs/WALL-THICKNESS.md) and keep the white drawing sheet under the grid in editors even when a backdrop image is loaded.
Co-authored-by: Cursor <cursoragent@cursor.com>
Third 1.59 pre-release: top-view furniture at real size, hide-decor /
hide-openings toggles, stable card-mod data-* hooks, HA value formatting,
editor polish, and the audit P0/P3 follow-ups. Wall thickness is spec-only.
Co-authored-by: Cursor <cursoragent@cursor.com>
The v1.55.2 recheck (verdict NEEDS FIX) found two lifecycle holes in the
first-open boot veil (HP-1552); both are closed here and covered by
demo/smoke_preloader_lifecycle.mjs, which fails on v1.55.2.
AUD-1552-01 (high): disconnect/reconnect while booting hid the plan
FOREVER. disconnectedCallback cleared the boot timer but kept its
truthy id, so 'updated()' never restarted the watcher. Now the id is
nulled on disconnect and connectedCallback restarts the whole veil
lifecycle: a fresh watch (fresh clock, BOOT_MAX_MS hard cap) while
booting, the tail timers when detached mid-fade or mid-grace.
AUD-1552-02 (medium): two equal reads at 200/400 ms revealed the plan
at ~400 ms, so HA chrome landing at 450+ ms jumped on a VISIBLE plan.
The veil now holds a full protective window (BOOT_MIN_MS=700 — the old
600 ms plus a frame-latency margin: a shift applied at ~590 ms only
materializes in the stage height a couple frames later) with 100 ms
sampling and trailing quiescence (BOOT_QUIET_MS=250 restarts on every
height change), capped by BOOT_MAX_MS=1200. After the reveal a short
soft grace (BOOT_SOFT_MS=1500, .stage.hpsettle) turns later passive
shifts into a 0.25 s height glide — the viewport ResizeObserver refits
the plan along the transition; deliberate height changes (_setMode into
an editor) cancel the grace so the plan never drifts under the pointer.
Reduced motion disables the glide.
Regressions (demo/smoke_preloader_lifecycle.mjs, all FAIL on v1.55.2):
- A: detach before the first tick -> reattach -> veil lifts within the
cap, plan visible, no hpboot class, no zombie veil after a mid-fade
remount either;
- B: parameterized layout shifts at 150/300/450/590 ms -> not a single
frame shows the plan at a non-final stage height;
- C: a shift after the reveal glides (>=3 intermediate frames), no snap.
smoke_modes.mjs now strips the transient hpsettle class from its exact
stage-class assertions. Docs: CHANGELOG en+ru, STATUS.
The v1.54.1 contract (first not-None value wins, zero is a value) covered
the source entity but not the card's fallback on the vacuum's own
selected_map: _vacMapId still used truthiness, so selected_map: 0 became
'default' on the frontend while trails.py resolve_map_id stored the run
under '0'. Calibration and server trails split across two keys and the
recorded run never rendered after reload.
The fallback is now the shared pure helper vacMapIdWithFallback (nullish
check), mirroring resolve_map_id. Cross-runtime regressions added for
selected_map = 0, '0' and '' on both sides; the frontend cases fail on the
old truthiness code.
Version 1.54.0 -> 1.54.1 in package.json, package-lock.json, manifest.json,
const.py and CARD_VERSION; rebuilt bundle in all three tracked copies
(dist/, demo/srv/assets/, custom_components/houseplan/frontend/).
Changelog entries (EN+RU) — one line per finding, HP-1540-01..06 — and
docs/STATUS.md bumped.
Suites on this exact tree: 161 frontend unit, 74 pure-backend, 74 browser
smokes — all green.
The plan shows the robot at work: the marker stays at its dock while a
puck drives the plan, calibration is one click or a drag-and-stretch
overlay, and the path is recorded server-side (current + previous run)
with never/cleaning/always display modes. Also: glow is the default
fill for new spaces, and the run-target search renders again.
Reported by the owner minutes after v1.53.0: typing a name showed no
results. The results existed — .candlist is a scrollable box, and a
scrollable flex item inside the dialog body collapses happily: 26 matching
rows rendered inside a 1px strip. The binding dropdown never showed this
because it sits inside .droppanel, a block context.
flex: 0 0 auto + a min-height keeps it open. The smoke now MEASURES the
list and the first row instead of counting DOM nodes — counting is exactly
why it passed a build where nothing was visible.
The owner's spec shipped in dev yesterday, released as one:
- tap action 'Run automation/script/scene' with a searchable picker,
per-domain services, save/runtime guards for the target
- 'Ask for confirmation' checkbox guarding toggle and run alike
- covers/valves in the card-wide toggle, garage/door/gate excluded
Inventory: 148 / 52 / 43 / 72.
- HP-1521-01: the plan-mode assertion looked for ANY .dev.on and the lit
kettle satisfied it — a false positive hiding the very regression it
guards. It targets d_lamp now (kettle asserted separately), and the
mutation check proves it: reverting the v1.52.1 gate fails the smoke.
- HP-1521-02: the checklist entry and the _stateClass comment still said
'yellow in every fill mode'. Both now state the two-part contract: the
state predicate is the glow-pool condition; the renderer keeps the badge
only where the spot is not drawn.
- HP-1520-01: the glow layer is hidden in the plan editor, but the yellow
suppression still fired there — a lit lamp had NEITHER indicator. The
gate now equals the layer's visibility (disp.fill === 'glow' &&
!this._markup), so the badge returns exactly where the spot is absent.
- HP-1513-01: the static card ignored marker.size and marker.angle — the
same stored marker looked different on the two cards. It mirrors
--dev-scale and the icon rotation now; geometry only, no live dressing.
- HP-1520-02: TESTING/UX-MODES still demanded the removed RGB icon tint,
and the lightC comment described the old use. All three brought to the
v1.52.0 contract.
smoke_light_badges grew the editor-mode vectors; new
smoke_size_angle_parity asserts the x3 ratio inside each card (absolute px
are incomparable across containers) and rotation on both. Inventory:
147 / 51 / 43 / 71.
Owner's rule, agreed 2026-07-29 after a field report (a lamp turned off by
tap looked different from one turned off by the wall switch):
- a lamp's colour lives ONLY in its glow. The v1.27 RGB tint of the icon,
border and shadow is deleted — that tint was the fork: with colour data
the lamp rendered dark-with-coloured-icon, without it plain yellow, and
the same lamp crossed the fork depending on how it was switched.
- in glow fill the indicator IS the spot: a source's badge stays standard,
lit or not (litLightEntity — the exact condition that casts the spot —
gates the suppression, so a lit socket keeps its yellow even in glow).
- in every other fill a lit source is plain yellow, like a heating TRV.
- icon morphing stays everywhere; the ripple colour still falls back to the
light colour (both explicitly confirmed by the owner).
smoke_light_badges covers the whole table (8 assertions); smoke_rgb_alarm
re-asserted: no rgb class, lit lamp yellow, ripple fallback keeps the
colour. README colour language updated. Inventory: 147 / 51 / 43 / 70.
- HP-1511-01: defaultPositions ran over different rosters — the full card
reserves grid cells for hidden devices, the static card compacted them
away, so an undragged marker sat in different spots on the two cards. The
static card feeds spaceDevs (hidden included) to the shared grid and
renders devs (visible) — exactly the split HP-1510-01 introduced for LQI.
- HP-1511-02: a hidden ripple-display marker rendered as an icon-less
inactive pulse. A ghost drops the display dressing entirely: ripple
presentation off, noicon off, base icon on, whatever marker.display says.
smoke_hidden_flag: the weak 'has icon OR noicon' assertion is gone — every
ghost must carry a base icon; new autoGridParity vector (vb-coordinate
comparison, the cards render in different view systems) and a ripple-ghost
vector. The demo stub got a connection.subscribeEvents so the static card's
module-level config cache can be invalidated between in-test cards.
- HP-1510-01: the static card's visibility filter had quietly become its
aggregation filter — the same room showed different Zigbee health on the
two cards. Two lists now: aggregation (room LQI, temp) sees every device
of the space including hidden ones, rendering sees visible only. Light
fill keeps excluding hidden through areaLights itself, so the contract
stays exactly as agreed: hidden counts toward signal, casts no light.
- HP-1510-02: the ghost suppressed state colors but still painted value
text, temperature, humidity, the LQI badge and the state-morphed icon.
All live numbers are gated on d.hidden now — a ghost is the base icon and
the name, nothing else.
smoke_hidden_flag grew both audit vectors: the 42 kW value-display ghost
renders no numbers, and a room whose only Zigbee devices are hidden paints
the identical lqi fill on the full and the static card.
The dev batch since v1.50.4, released as one:
- hiding is a per-device checkbox seeded once from the old filter
(docs/FILTERING.md); blue ghosts under a local 'Show hidden' toggle
- yellow = doing its main job now; TRVs glow by hvac_action, service
switches can no longer become a device's primary
- pinch/pan gestures in every editor on touch
- the room settings button: visual centre (inscribed circle + centroid
pull), icon-derived size, zooms with the plan; metrics visible in the
plan editor
Inventory: 147 frontend / 51 pure / 43 harness / 68 smokes.
The full card's _buildModel() was a hand-copied twin of spaceModels(), and
the twin missed the legacy-store fallbacks v1.50.3 gave the shared builder —
the same broken store rendered recovered in the static card and as
viewBox='0 0 0 0' with negative-width rects in the main one. The divergence
of the duplicates IS the bug, so the duplicate is gone: the full card calls
spaceModels() and only swaps the raw plan url back in (its signing flow must
not bake a signed url into a memoized model — 2026-07-27).
New smoke_legacy_geometry runs the audit's exact vector (zero viewport +
negative rect) through both models and both DOM trees and asserts parity:
full-canvas fallback, normalised rectangle, no negative SVG attributes.
Inventory: 140 / 51 / 43 / 65.
The ±4 bound from v1.50.2 measured view_box[2:4] and room w/h with the same
ruler as coordinates, so zero and negative sizes still passed the schema —
and viewBox='0 0 0 0' draws nothing on every client, with the static card
computing aspect-ratio: 0 / 0 on top. _EXTENT now requires strictly positive
sizes with a floor of one thousandth of the canvas (1 render unit — far
below any real room, keeps the maths finite); coordinates stay allowed to be
negative, a crop origin legitimately sits past the edge.
Defensive layer for stores that already hold a broken viewport: spaceModels
falls back to the whole canvas — both cards render from that model, so both
get the fallback — and a legacy rectangle with a negative size reads as the
same rectangle drawn from the other corner.
Also: the room settings button is the bottom row of the room card, and the
room name renders in the same spot in view and plan modes (owner's request,
committed earlier on dev).
- HP-1501-01: v1.50.1 bounded layout positions and left room rectangles,
polygon vertices, view_box and opening coordinates on bare _finite — the
same absurd-magnitude failure, one schema over. _GEOM (±4) covers them all
now, opening angles get ±360. And because a store may already hold such a
vertex from before the door existed, contentBounds applies its canvas
envelope to room geometry exactly as it does to device positions: the
point renders where it is, the frame ignores it, a space of nothing but
absurd points falls back to the whole canvas.
- HP-1501-02: a repair matching zero positions answered ok/moved:0 and
replaced the one-deep backup with an empty one — a typo right after
repairing the wrong space destroyed the promised way back. Empty match is
nothing_to_repair now: no write, no revision bump, backup intact.
Old test fixtures carried view_box [0,0,100,100] from the render-unit days;
they now use the normalised box the product actually stores.
- HP-1500-02: the stage budget was the absolute document coordinate, so any
tall dashboard content before the card was billed as header and the stage
collapsed to 0px. Measure our own chrome relative to the card plus a
bounded (<=120px) allowance for what the viewport keeps above us; re-measure
on window resize, remove the listener in disconnectedCallback.
- HP-1500-03, both layers: contentBounds opens a near-zero axis (< ~an icon)
up to a 200-unit floor and ignores extra points outside a canvas envelope
(-25%..125%) for FRAMING purposes only; the server bounds layout coordinates
to +-4 — any finite float used to pass, and one 1e100 hid the plan from
every viewer. A thin real room keeps its tight frame; the gate sensor past
the edge still stretches it.
- HP-1500-01: no automatic double-transform — a correct layout and a stranded
one are indistinguishable, and guessing wrong corrupts good data. Explicit
admin command houseplan/geometry/repair: dry_run previews, the backup rides
the same store write, undo restores, and routine layout writes now preserve
unrelated store keys instead of eating the backup.
Tests: contentBounds guards (unit), layout coordinate bounds + repair
lifecycle (harness), card-below-content smoke. Inventory: 139 / 49 / 42 / 64.
Owner's batch (committed to dev earlier today, released here):
- devices count as content for the default zoom;
- the editor no longer shifts the plan — the stage measures its own top
instead of assuming 118px of header;
- zoom goes out to 0.4x, centred.
From the review:
- HP-1490-01: the square-canvas migration wrote two stores in sequence, and
the first write deleted the aspects the second needed — a crash between
them stranded the layout in the old coordinates with nothing able to
finish it. The intent {space: old aspect} is durable now: saved to the
layout store before anything moves, cleared by the same write that stores
the migrated layout, each half idempotent behind its own trigger. The
update event fires only after both halves are on disk. Proven at the exact
crash boundary by a harness test that fails the layout write once.
- HP-1490-02: check_quota and the file write were two executor jobs with
nothing between them, so N parallel uploads all measured the store before
any of them wrote. One job under a dedicated upload_lock now — narrower
than write_lock on purpose, a directory scan must not stall config saves.
A failed write reserves nothing.
- HP-1490-03: the content frame fed pan, zoom, clamp AND pointer maths, so
the editors were boxed into yesterday's drawing. Edit modes measure from
the full square; mode switches refit rather than carry a view clamped
against the wrong base.
- HP-1490-04: Save could outrun the proportions read and ship the previous
file's ratio. Picking a plan clears it immediately; Save awaits the
bounded read and stores 'unknown' over a lie.
- §5: package-lock version synced, duplicated comment removed.
New: smoke_audit_1490.mjs, migration crash-recovery pure + harness tests,
parallel-quota harness test. Inventory: 138 unit / 49 pure / 40 harness / 64
smokes.
HP-1454-01 (high, release blocker): an uploaded SVG plan opened directly is a
top-level document of Home Assistant's own origin, so a <script> inside it
reaches the session's localStorage and API. Uploading needs write access, which
by default every authenticated user has. SVG responses now carry a sandbox CSP;
only SVG, because a CSP on a PDF can break the browser's viewer and a raster
image has nothing to disable. Verified in Chromium both ways: the script runs
without the header and does not with it.
HP-1454-02: attachment uploads wrote straight to <marker>/<filename>, outside
the config transaction — a cancelled dialog or a rejected save left the stored
url serving new bytes, and every new icon shared one 'new' folder, so two of
them attaching manual.pdf pointed at one file. Uploads take a free name, a new
icon gets a per-dialog staging folder promoted on an accepted save, and
config/set collects superseded and aged-orphan attachments like it does plans.
HP-1454-03: the debounce spaced out the starts of a write, not the writes. A
save slower than 500 ms let the next edit go out with the same expected_rev;
the server accepted the first, rejected the second, and the conflict handler
reloaded over the local copy. Writes are chained now — one in flight, each with
the revision the previous returned.
HP-1454-04: _openPairsCache keyed on room ids and links only, so an aspect
change or a dragged vertex left open boundaries and their glow cuts at old
coordinates. It keys on the rendered model object now — the same invalidation
the model cache already has, not a second strategy. The fingerprint also gained
an O(1) geometry roll-up per room.
HP-1454-05: outer collections were capped, inner ones were not. Limits for
poly points, open_to, controls, pdfs, text and url lengths, plus a total
serialized size cap; legacy is dropped server-side.
HP-1454-06: upload streams to a temp file and downloads use FileResponse, so a
50 MB manual no longer costs ~100 MB of RSS per transfer.
HP-1454-07: spaceModels() dropped room.settings, so the static card ignored the
per-room fill override. HP-1454-08: layout had no revision on point-wise writes
and no event, leaving static cards stale forever; it now keeps a revision,
returns it and fires houseplan_layout_updated. HP-1454-09: repair cleanup only
walked existing spaces, so a deleted space kept its warning. HP-1454-10:
serialize-javascript pinned past two advisories.
Tests: smoke_svg_sandbox (proves both directions), smoke_config_writer and
smoke_render_parity (both verified failing against a v1.45.4 build), six pure
tests for attachment collection and inner limits, four HA-harness tests for the
CSP, non-overwriting uploads, the size cap and layout revisions.
Docs: CHANGELOG.md + CHANGELOG.ru.md + ARCHITECTURE.md + TESTING.md + STATUS.md.
- four-tier principle fixed in ARCHITECTURE: global > space > room >
device, specific overrides general, unset inherits
- room.settings { fill_mode, temp_source, hum_source } with backend
schema; pure roomFillModeOf + sourceValue (+2 test suites, 114)
- gear on room cards in the Plan editor opens Room settings: rename,
re-area (current area included in the list), fill override (may opt
out of glow darkness), explicit temp/hum source with a searchable
device+entity dropdown; the same section in the creation dialog
- source feeds the room card, tooltip and temp fill; works for rooms
without an HA area (user-feedback case #1)
- smoke_room_settings.mjs (10 checks); TESTING/CHANGELOG/ARCHITECTURE
same-commit
- fill_mode 'glow': uniform darkness over every room; lit lamps render
radial gradient pools (rgb_color -> color temp via kelvinToRgb ->
configurable default; brightness scales alpha)
- pools clipped by the source's room + doorway sectors (doorSector rays
to door edges; hasRoomBehind blocks entrance doors); windows and
islands don't participate (no shadow casting, documented)
- glow radius in HA units (m/ft) in general settings, stored in cm;
palette group glow_base/glow_light; backend schema updated
- +4 unit tests (98 total); smoke_glow.mjs (10 checks); docs same-commit
- General settings dialog: fill colors grouped by mode (light on/off, temp
cold/ok/hot, lqi weak/strong), each with its own opacity; lqi fill lerps
between the endpoints; stored in settings.fill_colors (defaults omitted);
space-card uses the same palette
- per-space show_lqi toggle (badges + room tooltip line), inherits the card's
show_signal when unset
- fillColorsOf/lerpColor/roomFillStyle helpers (+4 tests), backend schemas,
smoke_general_settings; TESTING.md updated in the same commit
- scale (cm/cell) input compact again (generic width:100% dialog rule stretched it)
- space with no background image gets a white paper canvas (.stage.noplan), so
hand-drawn rooms read like a plan on paper
- TESTING.md updated in the same commit
- fix: Split snaps the click to the room's nearest wall instead of the grid, so
it works on non-grid-aligned rooms (imported/legacy polygons); the pull is
capped (~6 cells) so accidental mid-room clicks stay a miss; splitRoom() still
rejects a bad cut. closestPointOnBoundary() + unit test.
- docs: README (en+ru) documents Merge/Split/ruler/per-space scale (were undocumented);
TESTING.md merge/split rows + fresh self-run; new smokes smoke_merge_split,
smoke_split_nonsnap (incl. the capped-pull case).
- 73 frontend + 12 backend tests green; module eval + both cards register.
Matysh