Audit dev@2c947f4, DEV-2C947-01 (P2). One visible room and one marker with a
saved position 90 canvases out, then the marker is hidden: the auditor's probe
measured a frame 112.375x wider than the room it drew — the house opened as a
dot in the corner of empty canvas. The same on `houseplan-space-card`.
Both cards filtered the devices for RENDERING and framed the unfiltered list.
The full card's `_contentItems` walked `_devices` without looking at `hidden`,
while the renderer a few lines later drew `!d.hidden`; `space-render.ts` said
it out loud — `devs = spaceDevs.filter(d => !d.hidden)` for the markers,
`spaceDevs` for the frame.
The frame is PRESENTATION (docs/CANVAS.md §4), so it follows what is drawn.
Hidden devices keep everything the filtering contract gives them: they are
still built, still counted by room LQI, still hold their cell in the auto-grid
roster (so hiding one does not move a visible neighbour) — they are simply not
content items. The device editor's ghosts are not items either: reaching a
ghost is what the §5 pan slack is for, and making the frame follow a local,
ephemeral editor toggle would have made the opening view depend on which tab
had it switched on.
demo/smoke_canvas_frame.mjs is the auditor's probe, both cards: with the
marker visible the frame holds it (2 items is below MIN_VOTERS, so the outlier
vote cannot quietly rescue the test); hidden, the marker is gone from the DOM,
the frame is exactly the room's 60..940 and the room fills the stage. Three of
its checks are red on the parent commit.
Owner's report 2026-08-04: «в настройках "открыть\закрыть", а по нажатию
по-прежнему инфо-карточка».
Diagnosed on his own config, not guessed. The two curtain markers in the
office (`.storage/houseplan.config`) carry `tap_action: "cover"` exactly
as the dialog wrote it — so saving was never the problem. The devices
are Aqara «Roller shade driver E1», and their entity registry reads:
cover.shtory_v_kabinete_sprava hidden_by: integration
switch.shtory_..._reverse_direction visible
sensor.shtory_..._motor_state visible
binary_sensor.shtory_..._running visible
+ battery / temperature / linkquality diagnostic
`primaryEntity` ranks visible above hidden (that tier loop is deliberate
— a TRV's anti-scaling switch must not outrank the head that heats), and
inside a tier `switch` outranks `cover`. So the marker's primary was
`switch.*_reverse_direction`, `_clickDevice` handed the domain `switch`
to `resolveTapAction`, and `want === 'cover'` with `domain !== 'cover'`
degrades to 'info' — the info card the owner kept getting. The dialog
meanwhile went on offering the action, because `_bindingCoverTap` had
always looked at EVERY entity of the device. The two checks disagreed
about what the device is.
Fixed the way the climate temperature already does it: what a device
DOES is not always what its primary entity is. `coverEntityOf(entIds)`
(logic.ts) returns the first `cover.*` among all of the marker's
entities; `_clickDevice` uses it as the entity the tap acts on whenever
the explicit action is 'cover', and reads the domain, the device_class
and the current state off it, then calls the service on it. So the
guarded classes still degrade: a garage door's `cover.*` is found the
same way and `resolveTapAction` still answers 'info'. `_bindingCoverTap`
now goes through the same helper, so the option offered and the action
taken can no longer disagree about WHICH cover. No cover at all on the
device: `coverEid` is null, nothing changes, still the info card.
demo/smoke_cover_not_primary.mjs builds the owner's device entity for
entity (hidden cover + visible reverse-direction switch + diagnostics),
asserts the premise (the primary IS the switch), then goes end to end:
open the marker dialog, pick «Open/close», save through _saveMarker, let
the card rebuild the marker from that config, tap — cover.open_cover on
cover.office_curtain, then close_cover, then stop_cover while
travelling, and the service switch is never called. A garage
device_class on the same cover calls nothing, shows the info card and is
not offered in the dialog. Before the fix four of its checks are red.
Unit: coverEntityOf over the same entity list, empty/null input, two
covers (first wins) and a `sensor.cover_position` decoy.
Owner's report 2026-08-04: «добавь возможность таскать план при любом
масштабе, а не только при более 100%, как сейчас (и в редакторах, и в
просмотре)».
_stagePointerMove moved the view only while `_zoom > 1`. That gate is
older than the infinite canvas and made sense under the old rule — the
content had to cover the scene, so at 100% or below there was literally
nowhere to go and a drag could only jitter. The infinite canvas removed
the edge and gave panning a slack of one screen past the content in
every direction (CANVAS.md §5), and from that moment the gate was not a
guard but a missing feature: at 100% you could see the arrow «home is
that way» light up from a wheel-zoom, and still not drag the plan an
inch. The zoom no longer takes part in the decision — `_clampView`
alone says how far you may walk, at 400% and at 33% alike.
The drag also stopped depending on `_view` being materialised: it reads
`_viewOr(baseVb)`, so the very first drag on a freshly opened space
pans instead of doing nothing.
Gesture ownership is unchanged, and that is the point of most of the
new smoke: `_stagePointerDown` still bails out on the room-resize
handles, device badges, openings, room labels and decor shapes, and on
a decor drawing tool that consumes the press; two fingers are still a
pinch. The one place where a drag had a rival is the kiosk, where a
horizontal swipe changes floors. It is now classified once per gesture,
on the first movement past 8px (`_panLock`): horizontal in the swipe
zone (kiosk, zoom <= 1, more than one space) = swipe and no pan,
everything else = pan. So the plan never slides out from under a swipe,
a vertical drag on a wall tablet pans as it does everywhere else, and
zoomed in — where swipeTarget already refuses — a horizontal drag pans.
demo/smoke_pan_any_zoom.mjs: a drag on empty scene moves the view at
100%, 50% and 1/3 in View and in every editor (all seven plan tools,
Devices, Background), and at 400% as before; the walk stops at the
PAN_SLACK limit and the home arrow appears; a resize handle resizes, a
device badge moves the device and an opening slides along its wall,
none of them panning a pixel; two fingers still zoom; the kiosk still
swipes floors through a gesture that has real pointermove events in it
(smoke_kiosk only ever sent down+up), a vertical drag there pans, and a
zoomed-in horizontal drag pans without changing the floor.
Before the fix 25 of its checks are red, including every editor at
every zoom.
Two owner corrections after the infinite canvas.
- --icon-size goes back to being a percentage of the PLAN: a marker
grows and shrinks with the zoom, like everything else drawn on the
plan. The infinite canvas had made it a percentage of the viewport
(fixed pixel size) — the owner looked at it and asked for the
original contract back.
What survives from the canvas work is the NUMERATOR. The old
expression divided by `vb.w`, the stored view_box, which is not a
frame any more; a fixed NORM_W in its place would have shrunk every
marker on a plan drawn past the old square by exactly the factor the
plan is outsized (an invisible dot 50 canvases out). So it is now
`iconCqw() = iconPct * iconUnit(space) * kioskScale / view.w`, one
pure helper both renderers call. `iconUnit` is exactly NORM_W for
any plan that fits the old square — and the editor has never written
anything but `view_box: [0,0,1,1]` — so the rendered size is
bit-identical to the pre-canvas card: measured against the v1.56.0
bundle at a fixed view, both give 3.400 / 3.091 / 6.182 / 12.364 cqw
= 28.52 / 26.11 / 50.22 / 98.44 px. On a plan drawn at 1.5..3.8 the
marker is 26.1 px, the same as on an ordinary plan, instead of the
~11 px a fixed numerator would have given.
The static space-card uses the same helper: it has no zoom, but its
frame is the content now, so a bare iconPct shrank its markers as
the frame tightened. marker.size, the kiosk scales and every
satellite still ride on --dev-size, untouched.
- the icon angle in the device dialog steps by 5 degrees, not 10
(0..355): a marker often has to line up with a wall that is not on a
10-degree grid.
Tests: three unit tests on iconCqw (the legacy expression reproduced
digit for digit, the runaway plan, the no-view fallback); the infinite
canvas smoke's "same pixel size at zoom 1/4/1/3" assert is turned back
into "scales 4x / 1/3 with the zoom" plus a new one that the marker on
the far plan measures the same as on an ordinary one; the angle step
is pinned in smoke_size_angle_parity. docs/CANVAS.md §6 rewritten.
Panning a screen past the content is allowed (there is no edge), the
arrow shows up only when the plan is entirely off screen, one click
fits it back and the arrow leaves.
demo/smoke_infinite_canvas.mjs: a plan at 1.5..3.0 renders whole with
every room and marker on screen, a device placed at 3.4/2.9 and a room
at 3.8 survive the WS write (and the payload is fed to the REAL
voluptuous schema when it is installed), one stray at 90/90 neither
commands the view nor hides itself, «Показать» fits it, zoom-out stops
at exactly 3x, a marker keeps its pixel size at zoom 1/4/1-3, and an
old small plan frames to the same rectangle as before.
Adjusted, each with the reason in the smoke:
- smoke_audit_1490: "editors see the whole canvas" rewritten into the
intent HP-1490-03 actually had — there is room to draw outwards;
- smoke_zoom_out: the zoom-out floor is 1/3 of the content, not 0.4;
- smoke_hidden_flag: the static card frames content, so the auto-grid
parity check reads its viewBox instead of assuming 0..1000.
docs/TESTING.md: a manual checklist section for the feature.
- the frame is now the content on EVERY path — view mode, all three
editors and the static space-card. The editor special case ("give
them the whole square, there is nowhere to draw otherwise",
HP-1490-03) is replaced by what it actually needed: pan slack of one
screen in each direction plus zoom-out to 3x the content.
- _clampView no longer pins the content over the scene: there is no
edge to be stopped at. Zoom-out floor 0.4 -> 1/3 of the content.
- --icon-size is a percentage of the VISIBLE viewport instead of the
canvas (docs/CANVAS.md §6). Icons no longer grow with the zoom —
the one deliberate visual change, owner is aware. The per-device
multiplier and the kiosk scales still feed --dev-size, so every
satellite scales exactly as before, and the full card and the static
card now use the identical expression.
- adaptive grid: the dot pattern follows the VIEW (it is a property of
the plane, not of a box) and thins out by decades as you zoom away,
with every 5th/10th node kept bigger — the CAD convention.
- the middle zoom button is «Вписать всё» / «Fit all» (the old "reset
zoom" renamed, not duplicated) and is never disabled.
- an inline chip reports objects an order of magnitude away with one
«Показать» action that takes them into the frame; a small arrow
points home when the plan is entirely off screen. No modals.
- the decor drag clamp (-0.25..1.25) becomes the sane-range clamp; the
fallback position for an unplaced marker is the middle of the
content, not the middle of a canvas that has no edges.
docs/CANVAS.md is the source of truth (owner-approved 2026-08-03): the
normalised square was never a sheet of paper, only a coordinate system,
and users who drew past its edge could not place devices there.
Storage does not change and there is no migration. What changes is what
the renderers DERIVE from it:
- space-geometry.ts gains contentFrame() — one item per drawn object,
a rank-based outlier vote (median centre, 75th-percentile spread,
10x threshold, majority veto) and a fit-everything box beside the
opening view. contentBounds() is now a thin wrapper over it; the old
-25%..125% envelope is gone — it WAS the bug that made a plan drawn
at 1.5..3.0 frame empty canvas.
- spaceFrame()/spaceCenter() make view_box an optional first-frame hint
used only when there is nothing to frame; iconUnit() keeps auto
placement spacing in proportion (NORM_W for anything inside the old
square, so no layout moves); gridLevels() picks a legible grid step.
- validation.py: coordinates ±4 -> ±5000, sizes 0.001..5000, decor
-1..2 -> ±5000, opening length <= 5000. Garbage insurance, not a
frame — a stored 1e100 is still refused.
Units: test/canvas.test.mjs covers the plan past the square, the
outlier (and the three ways NOT to declare one), corruption, empty
space, a lone marker, image plans and the adaptive grid.
Backend: the limits, and that a config from any released version
validates untouched.
Owner 2026-08-03: «лучи поярче, иногда плохо видны. Убрать плавное
затухание — появляться и исчезать анимацией в 2 секунды при переходе
через 3 градуса над горизонтом».
RAY_MAX_ALPHA 0.18 -> 0.30: checked against both hard cases, a daylight
sun on white paper and a low sun over the dark glow canvas
(demo/shot_sun_bright.mjs writes the pair).
The gradual ramp-in over the first ~2 degrees is gone. rayAlpha() is now a
threshold: 0 below RAY_ELEVATION_MIN (3), rayPeakAlpha(cloud) at or above
it — cloud cover stays the only multiplier. Crossing it animates the
LAYER, never the geometry: <g class='sunlayer'> fades in/out over exactly
RAY_FADE_MS = 2 s (hp-sunfade-in / hp-sunfade-out), and the card keeps the
group mounted with .out for those two seconds so the dissolve can play at
all. prefers-reduced-motion skips it. Every other reason to drop the
wedges — editor, feature off, night, rain — stays instant.
Units: rayAlpha rewritten (ramp tests dropped), raysVisible/rayPeakAlpha/
RAY_MAX_ALPHA covered. Smoke: smoke_sun gains a threshold section (8 of
its checks fail on the previous build). docs/SUN.md + TESTING.md updated.
The shoulder badges, the centre tick and the soft magnet used to live only
in the drag of an EXISTING opening. Placing a new one — the gesture where
you actually choose the spot — showed a bare dashed ghost.
One implementation now serves both: _opRuler() takes a wall snap, the
opening length and the Shift flag, returns the magnetised point plus the
badges/tick, and is called from _opPointerMove (drag), _openingPreview
(hover) and _openingClick (placement). The click therefore creates the
opening exactly where the preview showed it, and clearing _cursorPt makes
ghost, badges and tick disappear together the moment it lands.
Smoke: smoke_opening_measure gains a «PLACING a new opening» section (13 of
its checks fail on the previous build). TESTING.md: checklist row.
Shot: demo/shot_opening_place.mjs.
The tap-action list gains 'cover' (i18n en/ru), offered only for a binding
that HAS a cover entity and never for the guarded classes garage/door/gate;
a value saved there anyway degrades to 'info', like a card-wide toggle does.
The service follows the CURRENT state: closed -> open_cover, open (incl.
ajar) -> close_cover, opening/closing -> stop_cover (a tap during travel is
a stop; the next one simply reverses), no readable state -> cover.toggle.
The existing 'ask for confirmation' checkbox guards it too.
Indication: a travelling cover breathes a soft yellow ring around the icon
(.covermove, the vacuum puck's 2.2s period, static under
prefers-reduced-motion) and its plate stays NEUTRAL — yellow means
'включено'. Static states morph the icon by state + device_class
(blinds/shutter/curtain/…); an unknown state morphs nothing and pulses
nothing. No position percentages.
Backend: validation.py accepts tap_action='cover' (+ test).
Smoke: demo/smoke_cover_tap.mjs. TESTING.md: checklist row.
- new i18n group gs.about_* (en/ru), rendered after the Sun group
- version line reuses CARD_VERSION (integration version is not exposed
to the frontend by any backend response, so no second line)
- links open in a new tab (rel=noopener), mdi:github / mdi:send icons
- demo icons.js: added the two mdi paths for the ha-icon shim
- smoke_general_settings: pins the About group, the rendered version
(must equal CARD_VERSION extracted from the built bundle) and both
link href/target/rel; verified red on the pre-feature bundle
Owner call 2026-08-03: the resolved default for spaces without an explicit
room_color is now a dark slate grey — reads on the white paper of drawn
plans and on the glow-dark theme. Spaces where the colour was ever chosen
keep their stored room_color; editor accents, resize handles, marker
ripple default and the compass needle stay on the accent colour.
Pinned defaults updated in test/logic.test.mjs and smoke_space_settings.
Owner's report: «план перезагружается при возврате на вкладку, хотя страница
жива». Diagnosis confirmed: Lovelace re-creates the card element when the
websocket reconnects after a long-backgrounded tab, and the fresh instance ran
the FULL first-open boot — veil + BOOT_MIN_MS + quiescence — reading as a plan
reload. On top of that, _loadFromServer's catch nulled _serverCfg after 8
failed tries, so a slow reconnect could genuinely blank an already-shown plan.
DEV-B703-01 warm re-mount: module-scoped memo (lives with the PAGE, not the
instance) of the settled header height, keyed by viewport size × card config.
A repeat instance adopts the settled geometry in setConfig and skips the veil
entirely — synchronous reveal at the saved zoom (HP-1551); a window resize
between instances changes the key and brings the full protective boot back.
The memo follows the live geometry (updated()'s measure) and is written on
every _bootSettled. Test hook: static _warmBootReset().
DEV-B703-02 stale-while-revalidate: an instance that already renders a valid
config (LS snapshot or a successful load) NEVER clears it on WS failures —
the local-only fallback is reserved for a card that never had a backend. A
self-driven retry (backoff, cap 8 s) keeps revalidating after willUpdate's
8-try budget is spent, and a connection 'ready' hook resets the budget and
quietly re-reads the config the moment the socket is back (the event
subscriptions re-subscribe on their own inside home-assistant-js-websocket).
Smokes: smoke_warm_remount (fails pre-fix: veil + hidden plan on re-mount;
resize invalidation stays cold), smoke_ws_resilience (fails pre-fix:
_serverCfg cleared after 8 tries, no revalidation after recovery); the
preloader smokes now reset the warm memo — they simulate a COLD first open.
The wedge cache key carried the SERVER revision, which only moves after the
debounced houseplan/config/set is acked. Every local mutation path ends in
_saveConfig(), which bumps _cfgEpoch synchronously — so a dragged window or
an edited room kept its old wedge for the whole write window (forever on a
failed write). The memo now uses the epoch, the same signal the model/
geometry caches key on (audit L1).
smoke_sun.mjs no longer masks the defect: touchCfg() bumps _cfgEpoch (what
production does) instead of faking a server rev, and a new regression drives
the REAL path — a pointer drag of the east window, exit from the editor
inside the debounce window (rev untouched), a room shrink through
_saveConfig() that must re-clip the wedge, and a late-ack survival check.
Fails on b701537, green with the fix. 218 unit + 79 backend + 85/85 smokes.
Owner: 'not like that — the whole wall is counted now, only the wall of ONE
room must count'. openingShoulders no longer merges collinear touching edges
of neighbouring rooms into a physical run: the wall is exactly the room-
polygon edge the opening is snapped to. Selection mirrors snapToWall
(nearest collinear edge, first in roomEdges order on a tie), so the ruler
always measures the same edge the drag snapped to; the center tick/magnet
now targets that edge's middle. Unit tests flipped to the new contract plus
a staggered shared-wall case; smoke_opening_measure recalculated for r1's
own edge 40..550 and grew a shared-wall scenario (both failed on the old
build, green now); docs/TESTING.md wording updated.
While an opening is dragged along a wall, a measure badge sits on the middle
of EACH shoulder: the along-the-wall distance from the wall end to the nearest
opening edge, live (segmentCm/formatLength, so metric/imperial and cell_cm are
honoured). Collinear touching room edges count as ONE physical wall — a user
thinks in whole walls, not the fragments roomEdges derives. When the opening's
center reaches the wall's center (±half a grid step) a perpendicular dashed
tick (alignment-guide look) appears through the wall center and the center
magnet-snaps; Shift disables the magnet. Everything vanishes on release.
Angled walls work: distances run along the wall, the tick is perpendicular.
- src/logic.ts: openingShoulders() — pure shoulder/centered math (unit-tested)
- src/houseplan-card.ts: _opMeasure state fed by _opPointerMove, badge layer
next to the resize badges, _renderOpeningCenterTick in the SVG
- demo/smoke_opening_measure.mjs: real-pointer drag; numbers checked against
the demo geometry (4.56/5.52 m, 5.04/5.04 m at center), magnet == 0.5,
Shift keeps 0.4987, everything gone after drop (was red without the feature)
- docs/TESTING.md: checklist line
Boolean .srcrow checkboxes (14 rows: sun rays, vacuum live position,
opening invert/flipH/flipV, marker show-entities/tap-confirm/climate-temp/
is-light/hide-from-plan, space borders/names/lqi + the 4 room-card label
flags) and every dialog range slider (9: fill opacities, kiosk icon/font,
ripple size, marker size/angle, card font, room opacity, room name/label
scale) render through _boolInput/_rangeInput. Each helper picks the native
HA element via customElements.get(...) at render time - the ha-* API is
undocumented and drifts between HA releases, so the presence check is the
only coupling; without the element (old HA, smoke env) the EXISTING input
renders unchanged, and both branches feed one handler (change/.checked,
input+change/.value). Radios, selects, the decorbar fill flag and the
import-dialog floor rows stay native on purpose. New smoke_ha_controls
covers both branches with ha-* stubs (two-way value flow); the other 83
smokes keep exercising the fallback, which stays pixel-identical.
209 hardcoded px values in styles.ts now resolve through design tokens
(--sp-1..6: 2/4/6/8/12/16, --rad-s/m/l: 6/8/12, --fs-s/m/l: 12/13/15,
--shadow-1/2/3). 151 swaps are value-identical; 58 stray values (3/5/7/9/
13/14px paddings, 11/12.5/13.5px fonts, 4/5/10/14px radii, two odd shadows)
are unified onto the nearest step, max +-2px by design. Untouched: %, all
calc() off --icon-size/--dev-size/--puck-size, viewBox units (compass text,
.rlabel, .vacfit), z-index, animation timings, colors. The phantom
--hp-panel/--hp-fg vars in .vaccalbar (defined nowhere) fold into
--hp-bg/--hp-txt. .modetab keeps its 10px h-padding: +2px wrapped the
header modes row at ~900px. 10px spacings stay literal for now - 10 is
equidistant from --sp-4/--sp-5 and moving it either way shifts the header;
candidate for its own step in a future pass.
Marker dialog grows a checkbox (climate devices only, default OFF):
'Use the device's temperature sensor'. When ticked, the AC/thermostat's
attributes.current_temperature shows as the standard .tval badge next to
the icon (scales with --dev-size, honours show_temperature) and joins the
room average like a thermometer. Unavailable / missing attribute = no
badge, no vote; several climate entities - the first valid one wins;
hidden devices keep voting (room climate stays registry-wide, exactly
like hidden thermometers). Stored as marker.use_climate_temp (bool|None,
validated in MARKER_SCHEMA). Units in test/devices.test.mjs, smoke
demo/smoke_climate_temp.mjs (real checkbox click, 20 + 23.5 -> 21.8 on
the room card), backend test, docs/TESTING.md.
- BG_STOPS: +10deg #e8ddcf (morning light), +30..90deg #ffffff; night half
of the scale untouched (-4 #131a28, -12..-90 #070c14)
- drawn-plan paper vs white sky: all paper shapes now sit in one
.hp-paperg group; in daynight mode the group gets a subtle
drop-shadow so the sheet contour stays readable at high sun
(static mode and night unaffected)
- pinned colors updated: test/sun.test.mjs, demo/smoke_sun.mjs;
smoke_bg_color paperUnderneath follows the .hp-paperg wrapper
- docs/SUN.md: explicit BG_STOPS table
- demo/shot_daynight.mjs: noon/sunset/night stills of the scale
Owner: the white backing must hug the ROOMS — an L-shaped house or detached
buildings grew a white square around the plan. Drawn plans now paper one
opaque shape per room (paperRoomShapes in logic.ts) in exactly the room's own
geometry — polygon points / rounded rect verbatim — so the union of the stack
is the paper: islands paint over their parent, open (virtual) boundaries
change nothing, and the scene bg_color / daynight sky reaches the exterior
walls, shows in the L's pocket and between buildings. Image plans keep the
backdrop-image rect (the canvas IS the paper). A live resize preview
(_rszPreview) feeds _renderCfg, so the paper moves WITH a dragged wall.
Static space-card follows the same contract. Paper is fill-only (stroke:none).
smoke_bg_color §11–13 rewritten: L-shaped + detached test rooms, paper-per-
room DOM checks, resize-preview wiring, pixel probes (acid in the pocket and
between buildings, none inside rooms); §13 injects the snapshot directly —
the module-level config-store cache made the old WS mock a no-op. Was 8 red
on the previous build, green now. docs/SUN.md + docs/TESTING.md contract
updated; unit test for paperRoomShapes.
Owner request 2026-08-03: bg_color (and the daynight sky) used to shine
through the plan itself — a hand-drawn plan's translucent room fills sat
directly on the scene colour, and a transparent backdrop image let it
through too. An opaque rect.hp-paper now sits under everything the plan
draws and hugs the plan's extents (the backdrop image rect, or the drawn
content bounds the opening view fits). Its colour is the pre-bg_color
canvas: white for drawn plans (.stage.noplan), the theme card background
under an image and on the static space-card. The daynight night keeps
dimming the plan via the zoomwrap brightness filter ONLY — the paper's
alpha never changes. The scene colour is visible strictly AROUND the
plan, in view/kiosk/editors and the static card alike.
smoke_bg_color grew the contract (sections 11–13): paper presence,
geometry and opacity in view/editors/night, the white drawn-plan paper,
the static card's paper, plus a pixel proof against an acid #ff00ff
background (screenshot → canvas: no acid admixture inside the plan, acid
right outside it). The suite fails on the previous build.
docs: SUN.md background contract + TESTING.md checklist item.
smoke_general_settings: the settings dialog now has 14 gsrows and a Sun
group; smoke_temp_fill: the space dialog gained the per-space compass
field. demo/shot_sun.mjs renders the evening-wedges and compass shots.
The v1.55.2 recheck (verdict NEEDS FIX) found two lifecycle holes in the
first-open boot veil (HP-1552); both are closed here and covered by
demo/smoke_preloader_lifecycle.mjs, which fails on v1.55.2.
AUD-1552-01 (high): disconnect/reconnect while booting hid the plan
FOREVER. disconnectedCallback cleared the boot timer but kept its
truthy id, so 'updated()' never restarted the watcher. Now the id is
nulled on disconnect and connectedCallback restarts the whole veil
lifecycle: a fresh watch (fresh clock, BOOT_MAX_MS hard cap) while
booting, the tail timers when detached mid-fade or mid-grace.
AUD-1552-02 (medium): two equal reads at 200/400 ms revealed the plan
at ~400 ms, so HA chrome landing at 450+ ms jumped on a VISIBLE plan.
The veil now holds a full protective window (BOOT_MIN_MS=700 — the old
600 ms plus a frame-latency margin: a shift applied at ~590 ms only
materializes in the stage height a couple frames later) with 100 ms
sampling and trailing quiescence (BOOT_QUIET_MS=250 restarts on every
height change), capped by BOOT_MAX_MS=1200. After the reveal a short
soft grace (BOOT_SOFT_MS=1500, .stage.hpsettle) turns later passive
shifts into a 0.25 s height glide — the viewport ResizeObserver refits
the plan along the transition; deliberate height changes (_setMode into
an editor) cancel the grace so the plan never drifts under the pointer.
Reduced motion disables the glide.
Regressions (demo/smoke_preloader_lifecycle.mjs, all FAIL on v1.55.2):
- A: detach before the first tick -> reattach -> veil lifts within the
cap, plan visible, no hpboot class, no zombie veil after a mid-fade
remount either;
- B: parameterized layout shifts at 150/300/450/590 ms -> not a single
frame shows the plan at a non-final stage height;
- C: a shift after the reveal glides (>=3 intermediate frames), no snap.
smoke_modes.mjs now strips the transient hpsettle class from its exact
stage-class assertions. Docs: CHANGELOG en+ru, STATUS.
Owner request: in the resize tool make the wall-drag handles twice
smaller, replace the circle with a 'wall + two opposite arrows' icon,
drag cursor.
- visible glyph: wall segment with two arrows perpendicular to the
edge (the drag directions), rotated per wall orientation; accent ink
over a --hp-bg halo, readable on any plan
- HIT area unchanged: an invisible circle of the original finger-sized
radius keeps touch targets and the HP-1550-04 hit priority over
openings (04_handle_wins_hit_test still passes)
- cursor: grab on hover, grabbing while dragging (:active)
- scale-frame corner handles untouched (classic filled circles,
nwse-resize)
- docs/RESIZE.md: handle appearance updated
In normal (non-kiosk) mode the stage is calc(100dvh - _hdrH), and _hdrH is
measured from HA's chrome, which finishes loading AFTER the card's first
paint — late panels nudged the height and the freshly painted plan visibly
jumped (kiosk is a flat 100dvh, hence 'perfect in kiosk').
Fix, per the owner's sketch:
- until the stage height reads the same twice in a row (200 ms cadence) or
a hard ~600 ms cap, the plan stays hidden (.hpboot) and is revealed only
after a refit — not a single frame paints at a stale height;
- that window is covered by a quiet product-style preloader: dark veil,
small pulsing outline house (the card's own mdi:home-city outline,
inline SVG), no text, 0.15 s opacity fade-out;
- prefers-reduced-motion gets a static house; kiosk never shows the veil;
first open of the card instance only — floor/mode switches are untouched.
smoke_preloader simulates an HA panel landing at t=300 ms and asserts the
veil, zero plan-visible frames at a non-final height, the kiosk opt-out and
the reduced-motion variant; serve.mjs starts every smoke after the reveal,
where the user starts.
New setting 'background around the plan' (#rrggbb):
- global: config.settings.bg_color, edited in the gear dialog with a live
preview and a 'theme default' reset (empty = keep the stylesheet default);
- per-space override in the space dialog next to the room colors, empty =
inherit the general setting (the show_lqi/fill_mode pattern);
- applied to the stage in view and kiosk modes (editors keep their own
canvas) and to the static houseplan-space-card;
- backend validates both keys with the same strict #rrggbb match as
room_color; garbage strings are rejected (test_bg_color_setting).
smoke_bg_color covers apply/override/inherit/reset, dialog previews, the
wire format of the cleared override, kiosk and the static card.
Lines drawn in the background (decor) editor showed notched 'teeth' where
two segments met at an angle. Decor <line> elements — both the saved render
and the live drawing preview — now carry stroke-linecap/linejoin=round, so
every line end reads as a circle of the stroke width and joints are smooth.
smoke_decor asserts the round attributes on the draft and the saved lines.
The cached config (LS_CFG) painted its first frames with _zoom=1 because
the saved per-space zoom was applied only by _restoreZoom()'s rAF after
the server config round-trip - the plan visibly jumped to the saved scale.
- setConfig now arms _zoom from LS_ZOOM for the resolved space before the
first view computation (view mode, no established view only);
- _restoreZoom applies the view synchronously when the stage is already
measured (space tabs, kiosk carousel, editor exit included); the rAF
path remains only for an unmeasured stage, where updated() already fits
with the correct zoom before the first paint.
New smoke_zoom_flash.mjs samples every rAF frame from the first possible
moment with a primed config cache, saved zoom 1.8 and a 350 ms server
delay: a visible stage with a default-scale viewBox fails the run
(22 such frames before the fix, 0 after).
01 (high): the live resize preview no longer touches _serverCfg — it lives in
the _rszPreview overlay served to renders via _curSpaceCfg/_renderCfg, so a
debounced write queued from a previous edit can never carry mid-drag geometry
to the server; commit happens once, on pointerup; Esc just drops the overlay.
03: pointercancel/lostpointercapture take the cancel path (no commit, no undo
step, no write) for edge and corner handles alike.
04: in the resize tool the wall handles own the hit test — the transparent
.op-hit is inert and the resize layer renders above the openings; a door at a
wall midpoint no longer shadows the handle, other tools unchanged.
02: the 30 cm floor is orientation-independent — minSpanClearance (band sweep
of the moved stretch) for wall drags, minPolyWidth (calipers) for the scale
frame; already-thin rooms may improve, never worsen.
demo/smoke_room_resize.mjs drives real pointer events over the handles:
T-stack drag (r1 grows, r2 translates, r3 becomes a 6-vertex L — checked
numerically), live badges appear and change, opening rides the wall,
neighbour 30 cm stop, opening-anchor stop, scale frame proportional with
static neighbours and a neighbour stop, Esc-cancel, one-step undo, no
handles in any other tool/mode. Fails on the pre-feature blob (verified).
Wall-midpoint handles for every room (finger-sized, pointer-captured, no
stage-pan conflict); dragging moves the wall along its normal with live
preview through the config snapshot, shared stretches drag the neighbour
(T-junctions insert vertices), openings on the wall travel along. Click a
room for the corner scale frame (uniform, about the opposite corner,
neighbours never dragged). Live badges: dragged+adjacent wall lengths and
m² per reshaped room. Grid snap, Esc cancels the drag, Ctrl+Z pops the
resize undo stack (one release = one step). Legacy rects are saved back
as polygons; three blob copies rebuilt.
Mechanism A (wall drag along its normal, shared stretches of neighbours move
together, T-junctions insert vertices) and mechanism B (corner scale frame)
with every stop: min room size ~30 cm, self-intersection, foreign rooms
(polyclip area check — roomsOverlap alone misses collinear slide-over),
islands, opening anchors. node:test units pin each stop numerically.
HP-1543-01 (medium): exiting an editor AFTER switching floors inside it left
the editor working zoom on screen in view mode — the snapshot guard
(snap.space) dropped the restore and nothing else put the viewport back.
A space-mismatched exit now falls back to _restoreZoom() of the current
floor's saved view zoom (per-space store/LS_ZOOM were never polluted, the
view-only _saveZoom guard is untouched). Regression: crossFloor* asserts in
demo/smoke_zoom_out.mjs — red on v1.54.3, green now.
HP-1543-02 (low): a rapid off->on retrip before the current flash ended did
not restart the CSS animation: the senseflash class and animation-name never
changed, so the browser kept the old timeline and the second detection played
nothing once the first one-shot had finished (base opacity 0). Every
witnessed trip now bumps a generation counter; its parity alternates the
identical keyframes hp-sense / hp-sense-b via the .sf2 marker — a new
animation identity forces a fresh timeline per detection. flashTs and the
window timer re-arm as before; prefers-reduced-motion keeps the static ring
(retrip only extends the window). Regression: rapid* asserts in
demo/smoke_motion_sense.mjs — red on v1.54.3, green now.
Owner's contract (2026-08-01, вариант «б») replaces yesterday's 'sense' class
(29dae45, lived <1 day, stored nowhere — no migration):
- MOTION (device_class motion): a SHORT one-shot flash at the off→on
transition — 3 beats of the yellow ring (hp-sense 1.1s x3, ~3.3s), then
silence even while the entity still reports 'on': «движение = разовая
вспышка в момент обнаружения; cool-down не пульсирует». A new off→on trip
flashes again. Tracking lives in _senseRt (markerId → last state + flash
ts), stamped by _senseTick on the hass tick (the _vacTick pattern); one
setTimeout per entry repaints the card when the window closes so the
'senseflash' class is dropped without a state change (cleared in
disconnectedCallback). First sight already-'on' and unavailable→on do not
flash — not a witnessed detection.
- OCCUPANCY/PRESENCE while 'on': 'sensehold' — a STATIC yellow ring, no
animation, opacity 0.4 (the reduced-motion brightness): «присутствие =
статичное кольцо пока обитаемо».
- Unchanged: the yellow FILL stays reserved for «включено», alarm's red ring
wins on the shared ::after, ghosts draw nothing.
- prefers-reduced-motion: the flash becomes a static ring for the same ~3.3s
window (consistent with alarm); sensehold is static by design.
Smoke smoke_motion_sense.mjs rewritten to the new contract (13 asserts fail
on the pre-fix bundle): finite iteration count '3', flash gone after 3.6s
while state is still 'on' (the key assert), re-trip flashes again,
occupancy/presence static ring, neutral badge, hidden ghost inert.
shot_motion_sense.mjs now cycles off→on to arm the flash.
Owner's rule (2026-08-01): the yellow FILL is reserved for 'on' — a tripped
sensor keeps the neutral badge and gets a new 'sense' state class instead:
a gentle .dev.sense::after ring in the .dev.on yellow (--hp-on), 2.4s period,
max opacity 0.5 — the soft sibling of the red .dev.alarm siren. Declared
before .dev.alarm so red wins on the shared ::after if both ever apply;
ghosts don't pulse (hidden gate already strips the state class).
prefers-reduced-motion: static faint ring, same treatment as alarm.
Smoke smoke_motion_sense.mjs (fails on the pre-fix bundle): sense class on/off,
::after animation, neutral background (not --hp-on), occupancy/presence,
hidden ghost. shot_motion_sense.mjs captures the ring for review.
Matysh