Release v1.46.6

Detaching a plan finally keeps the file where it matters — at the save, not just
on the scheduled pass. Transitions are classified by the space that owned the
file, and nothing is deleted for being old except a staging folder.

custom_components/houseplan/__init__.py

@@ -22,7 +22,7 @@ from .const import (
 )
 from .plans import collect_attachments, collect_plans, sweep_upload_temps
 from .repairs import async_check_plan_files
-from .store import HouseplanConfigEntry, create_data, get_data
+from .store import HouseplanConfigEntry, create_data
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -118,16 +118,22 @@ async def async_setup_entry(hass: HomeAssistant, entry: HouseplanConfigEntry) ->
         files_dir = Path(hass.config.path(FILES_DIR))
         plans_dir = Path(hass.config.path(PLANS_DIR))
         try:
-            data = get_data(hass)
-            if data is None:  # entry unloaded — nothing authoritative to compare against
-                await hass.async_add_executor_job(sweep_upload_temps, files_dir)
-                return
+            # `data` from the closure, NOT get_data(hass): during
+            # async_setup_entry the entry is still SETUP_IN_PROGRESS, so
+            # async_loaded_entries() does not list it and the lookup returned
+            # None. The startup pass then silently degraded to removing
+            # streaming temporaries only, and the real collection waited a full
+            # day — restarting more often than that meant it never ran at all
+            # (HP-1462-01). The callback is unregistered with the entry, so
+            # closing over its runtime data matches the lifecycle exactly.
             async with data.write_lock:
                 stored = await data.config_store.async_load() or {}
                 cfg = stored.get("config") or {}
 
                 def _collect() -> int:
                     n = sweep_upload_temps(files_dir)
+                    # same config on both sides: nothing is superseded, so this
+                    # only ever collects what the shared rules call abandoned
                     n += collect_attachments(files_dir, cfg, cfg)
                     n += collect_plans(plans_dir, cfg, cfg)
                     return n
@@ -138,6 +144,7 @@ async def async_setup_entry(hass: HomeAssistant, entry: HouseplanConfigEntry) ->
         except Exception:  # noqa: BLE001 — housekeeping must never fail a setup
             _LOGGER.exception("House Plan: sweeping unreferenced files failed")
 
+    data.sweep = _sweep
     await _sweep()
     entry.async_on_unload(
         async_track_time_interval(hass, _sweep, timedelta(hours=24))

custom_components/houseplan/const.py

@@ -22,9 +22,16 @@ MAX_SIGN_PATHS = 200
 # seconds ago may belong to another client's transaction that has not written
 # its configuration yet (review R3-1).
 PLAN_ORPHAN_TTL_S = 3600
+
+# Kept for compatibility with anything reading it; the collectors no longer use
+# a long grace at all. Every attempt to age files out ended badly — first by
+# deleting detached plans, then by racing the save that was about to reference a
+# retried upload. What is left is deliberately simple: files go when the user's
+# action says so, plus staging folders after PLAN_ORPHAN_TTL_S.
+SCHEDULED_GRACE_S = 30 * 24 * 3600
 FILES_DIR = "houseplan/files"
 CONF_ADMIN_ONLY = "admin_only"
-VERSION = "1.46.2"
+VERSION = "1.46.6"
 
 DEFAULT_CONFIG: dict = {
     "spaces": [],

custom_components/houseplan/frontend/houseplan-card.js

@@ -2561,4 +2561,4 @@ const t=globalThis,e=t.ShadowRoot&&(void 0===t.ShadyCSS||t.ShadyCSS.nativeShadow
               </button>`}
         </div>
       </div>
-    </div>`}}ps.properties={hass:{attribute:!1},_config:{state:!0},_space:{state:!0},_layout:{state:!0},_devices:{state:!0},_tip:{state:!0},_selId:{state:!0},_toast:{state:!0},_serverCfg:{state:!0},_mode:{state:!0},_tool:{state:!0},_path:{state:!0},_cursorPt:{state:!0},_mergeSel:{state:!0},_openingDialog:{state:!0},_openingInfo:{state:!0},_mergeDialog:{state:!0},_splitSel:{state:!0},_decorTool:{state:!0},_decorStyle:{state:!0},_decorDraft:{state:!0},_decorSel:{state:!0},_decorTextDialog:{state:!0},_kioskDialog:{state:!0},_kioskDots:{state:!0},_areaSel:{state:!0},_nameSel:{state:!0},_roomDialog:{state:!0},_roomEditId:{state:!0},_roomFill:{state:!0},_roomTempSrc:{state:!0},_roomHumSrc:{state:!0},_roomSrcOpen:{state:!0},_roomSrcFilter:{state:!0},_roomNameScale:{state:!0},_roomLabelScale:{state:!0},_spaceDialog:{state:!0},_infoCard:{state:!0},_rulesDialog:{state:!0},_settingsDialog:{state:!0},_importDialog:{state:!0},_markerDialog:{state:!0},_zoom:{state:!0},_view:{state:!0}},ps._touchSeen=!1,ps._noHoverMq="undefined"!=typeof window&&"function"==typeof window.matchMedia&&window.matchMedia("(hover: none)").matches,ps.styles=Ui,customElements.get("houseplan-card")||customElements.define("houseplan-card",ps),window.customCards=window.customCards||[],window.customCards.find(t=>"houseplan-card"===t.type)||window.customCards.push({type:"houseplan-card",name:"House Plan Card",description:"Interactive house plan: spaces, rooms and devices with live states and drag layout."}),console.info("%c HOUSEPLAN-CARD %c v1.46.2 ","background:#3ea6ff;color:#04121f;font-weight:700","");
+    </div>`}}ps.properties={hass:{attribute:!1},_config:{state:!0},_space:{state:!0},_layout:{state:!0},_devices:{state:!0},_tip:{state:!0},_selId:{state:!0},_toast:{state:!0},_serverCfg:{state:!0},_mode:{state:!0},_tool:{state:!0},_path:{state:!0},_cursorPt:{state:!0},_mergeSel:{state:!0},_openingDialog:{state:!0},_openingInfo:{state:!0},_mergeDialog:{state:!0},_splitSel:{state:!0},_decorTool:{state:!0},_decorStyle:{state:!0},_decorDraft:{state:!0},_decorSel:{state:!0},_decorTextDialog:{state:!0},_kioskDialog:{state:!0},_kioskDots:{state:!0},_areaSel:{state:!0},_nameSel:{state:!0},_roomDialog:{state:!0},_roomEditId:{state:!0},_roomFill:{state:!0},_roomTempSrc:{state:!0},_roomHumSrc:{state:!0},_roomSrcOpen:{state:!0},_roomSrcFilter:{state:!0},_roomNameScale:{state:!0},_roomLabelScale:{state:!0},_spaceDialog:{state:!0},_infoCard:{state:!0},_rulesDialog:{state:!0},_settingsDialog:{state:!0},_importDialog:{state:!0},_markerDialog:{state:!0},_zoom:{state:!0},_view:{state:!0}},ps._touchSeen=!1,ps._noHoverMq="undefined"!=typeof window&&"function"==typeof window.matchMedia&&window.matchMedia("(hover: none)").matches,ps.styles=Ui,customElements.get("houseplan-card")||customElements.define("houseplan-card",ps),window.customCards=window.customCards||[],window.customCards.find(t=>"houseplan-card"===t.type)||window.customCards.push({type:"houseplan-card",name:"House Plan Card",description:"Interactive house plan: spaces, rooms and devices with live states and drag layout."}),console.info("%c HOUSEPLAN-CARD %c v1.46.6 ","background:#3ea6ff;color:#04121f;font-weight:700","");

custom_components/houseplan/manifest.json

@@ -16,5 +16,5 @@
   "issue_tracker": "https://github.com/Matysh/houseplan-card/issues",
   "requirements": [],
   "single_config_entry": true,
-  "version": "1.46.2"
+  "version": "1.46.6"
 }

custom_components/houseplan/plans.py

@@ -121,15 +121,25 @@ def collect_attachments(
 ) -> int:
     """The same commit-scoped rule as `collect_plans`, for marker attachments.
 
-    A file the old revision referenced and the new one does not was superseded
-    by this commit and goes. Anything else unreferenced is an upload that was
-    never saved — a cancelled dialog, a rejected write — and waits out
-    PLAN_ORPHAN_TTL_S first, because a fresh one may belong to a dialog the user
-    still has open. Never raises: it runs behind a durable write.
+    A file the old revision referenced and the new one does not, whose marker
+    still exists, was removed on purpose — the dialog has a trash button and
+    promises nothing. It goes. Everything else is kept, except a staging folder
+    (`up_*`), which by construction only ever holds an upload from a dialog that
+    was never saved: those go after PLAN_ORPHAN_TTL_S. Never raises: it runs
+    behind a durable write.
     """
     new_refs = attachment_refs(new_cfg)
     old_refs = attachment_refs(old_cfg)
-    cutoff = (time.time() if now is None else now) - PLAN_ORPHAN_TTL_S
+    # Removing an attachment from a device that still exists is the user saying
+    # "drop this one" — a trash button, no promise that anything is kept. A
+    # device that is GONE is a different transition, and its files follow the
+    # same rule as a deleted space's plan: kept.
+    live_markers = {str(m.get("id")) for m in (new_cfg or {}).get("markers") or []}
+    # Same distinction as for plans. A staging folder (`up_*`) is different: it
+    # only ever holds an upload from a dialog that was never saved, so the short
+    # rule is exactly right there even on the timer.
+    now_s = time.time() if now is None else now
+    staging_cutoff = now_s - PLAN_ORPHAN_TTL_S
     removed = 0
     try:
         folders = sorted(p for p in files_dir.iterdir() if p.is_dir()) if files_dir.is_dir() else []
@@ -138,6 +148,9 @@ def collect_attachments(
         return 0
     removed += sweep_upload_temps(files_dir, now)
     for folder in folders:
+        # A staging folder only ever holds an upload from a dialog that was never
+        # saved — unambiguous, so an hour is right, and no device owns it.
+        staging = folder.name.startswith("up_")
         try:
             items = sorted(p for p in folder.iterdir() if p.is_file())
         except OSError:
@@ -146,12 +159,19 @@ def collect_attachments(
             rel = f"{folder.name}/{item.name}"
             if rel in new_refs:
                 continue
-            try:
-                stale = item.stat().st_mtime < cutoff
-            except OSError:
-                stale = False
-            if rel not in old_refs and not stale:
-                continue
+            dropped = rel in old_refs and folder.name in live_markers
+            if not dropped:
+                if not staging:
+                    # Same rule as for plans: not asked for, so kept. A file in
+                    # a device's folder that the device does not list is an
+                    # upload whose save was rejected — and ageing those out
+                    # raced the retry that was about to reference them.
+                    continue
+                try:
+                    if item.stat().st_mtime >= staging_cutoff:
+                        continue
+                except OSError:
+                    continue
             try:
                 item.unlink()
                 removed += 1
@@ -186,6 +206,14 @@ def plan_refs(cfg: dict[str, Any] | None) -> set[str]:
     return out
 
 
+def plan_by_space(cfg: dict[str, Any] | None) -> dict[str, str]:
+    """space id -> the plan file it references ('' when it has none)."""
+    return {
+        str(sp.get("id")): plan_basename(sp.get("plan_url"))
+        for sp in (cfg or {}).get("spaces") or []
+    }
+
+
 def is_plan_file(name: str) -> bool:
     """Does this look like a plan we wrote: <space>.<ext> or <space>.<token>.<ext>?"""
     parts = name.split(".")
@@ -220,7 +248,29 @@ def collect_plans(
     """
     new_refs = plan_refs(new_cfg)
     old_refs = plan_refs(old_cfg)
-    cutoff = (time.time() if now is None else now) - PLAN_ORPHAN_TTL_S
+    # A commit knows what it superseded. The timer only knows what nothing
+    # points at *right now*, and for a plan that is a reversible state: the
+    # editor detaches the image when a space switches to "draw" and says the
+    # file stays on disk. So the scheduled pass keeps anything belonging to a
+    # space that still exists, and waits a month for the rest.
+    # A space with NO plan_url has had its image detached — reversible, and the
+    # editor promises the file stays. A space that HAS one is different: any
+    # other file of its own is a superseded or rejected upload, so the short
+    # rule is right for those. Getting this distinction wrong (protecting
+    # nothing) destroyed two detached plans on 2026-07-28.
+    # The short rule fits exactly one case: a space that HAS a plan, where any
+    # other file of its own can only be a superseded or rejected upload.
+    old_by_space = plan_by_space(old_cfg)
+    new_by_space = plan_by_space(new_cfg)
+    # A file that left the configuration tells us nothing on its own: replacing a
+    # plan, detaching one and deleting a space all look identical from
+    # `old_refs - new_refs`. Only the first is a deletion the user asked for
+    # (HP-1465-01 — the guards below were written and then never reached,
+    # because the code decided "superseded" before asking why).
+    replaced = {
+        name for space, name in old_by_space.items()
+        if new_by_space.get(space) and new_by_space[space] != name
+    }
     removed = 0
     try:
         items = sorted(plans_dir.iterdir()) if plans_dir.is_dir() else []
@@ -233,12 +283,21 @@ def collect_plans(
     for item in items:
         if not item.is_file() or item.name in new_refs or not is_plan_file(item.name):
             continue
-        superseded = item.name in old_refs
-        try:
-            stale = item.stat().st_mtime < cutoff
-        except OSError:
-            stale = False
-        if not superseded and not stale:
+        if item.name not in replaced:
+            # PRODUCT RULE (owner's decision, 2026-07-28): a plan file we were
+            # not told to delete is kept, however long it sits there. Detaching
+            # is one click to undo and the editor says the image stays; deleting
+            # a space is deliberate but the image was imported and may be
+            # nowhere else. The errors are not symmetrical — unnecessary
+            # megabytes can be removed by hand, a deleted file cannot be
+            # brought back.
+            #
+            # There is deliberately no age rule here. An earlier version aged
+            # out "rejected uploads" — a file of a space that has a plan, which
+            # was never the plan — and that raced a save: the sweep deleted the
+            # upload from the failed attempt while a retry was committing a
+            # reference to it. A rule that can delete a file somebody is about
+            # to point at is not worth the disk it reclaims.
             continue
         try:
             item.unlink()

custom_components/houseplan/store.py

@@ -2,6 +2,7 @@
 from __future__ import annotations
 
 import asyncio
+from collections.abc import Awaitable, Callable
 from dataclasses import dataclass, field
 from typing import Any
 
@@ -42,6 +43,11 @@ class HouseplanData:
     # One lock for every load→modify→save cycle of both stores: prevents
     # lost updates from concurrent WS calls and makes the rev check atomic.
     write_lock: asyncio.Lock = field(default_factory=asyncio.Lock)
+    # Collect files nothing references any more. Set during setup, which also
+    # runs it once and schedules it daily. Exposed so it can be invoked
+    # directly — a test that fakes a 24 h jump proves the timer fires, not that
+    # the work happens, and those are different claims.
+    sweep: Callable[[], Awaitable[None]] | None = None
 
 
 HouseplanConfigEntry = ConfigEntry[HouseplanData]

custom_components/houseplan/websocket_api.py

@@ -263,34 +263,68 @@ async def ws_content_sign(hass: HomeAssistant, connection, msg: dict[str, Any])
 )
 @websocket_api.async_response
 async def ws_files_cleanup(hass: HomeAssistant, connection, msg: dict[str, Any]) -> None:
-    """Delete a marker's file folder — called only AFTER the config is committed."""
+    """Drop a marker folder's leftovers after its files moved elsewhere.
+
+    Called after a rebind: the files were copied to the new marker id and the
+    config that references them is committed, so the source folder is spent.
+
+    It used to `rmtree` the folder on the client's word alone. Two ways that
+    ends badly: a partial copy leaves some urls still pointing INTO this folder
+    (the migration deliberately does not rewrite those), and a wrong or stale
+    id from any client deletes a live marker's attachments outright. So the
+    server checks for itself — under the config lock — and removes only files
+    the stored configuration does not reference. Same principle as the
+    collector: a client may say what it no longer needs, never what may go.
+    """
     if not _check_write(hass, connection):
         connection.send_error(msg["id"], "unauthorized", "Only administrators may edit files")
         return
-    import shutil
-    from pathlib import Path
-
+    rt = _runtime(hass, connection, msg["id"])
+    if rt is None:
+        return
     from .const import FILES_DIR
+    from .plans import attachment_refs
     from .validation import sanitize_marker_id
 
     mid = sanitize_marker_id(msg["marker_id"])
-    if not mid:
-        connection.send_result(msg["id"], {"ok": True, "removed": False})
-        return
     base = Path(hass.config.path(FILES_DIR)).resolve()
-    target = (base / mid).resolve()
-    if not str(target).startswith(str(base)) or target == base:
-        connection.send_result(msg["id"], {"ok": True, "removed": False})
+    target = (base / mid).resolve() if mid else base
+    if not mid or not str(target).startswith(str(base)) or target == base:
+        connection.send_result(msg["id"], {"ok": True, "removed": 0, "kept": 0})
         return
 
-    def _rm() -> bool:
-        if not target.is_dir():
-            return False
-        shutil.rmtree(target, ignore_errors=True)
-        return True
+    async with rt.write_lock:
+        stored = await rt.config_store.async_load() or {}
+        refs = attachment_refs(stored.get("config") or {})
 
-    removed = await hass.async_add_executor_job(_rm)
-    connection.send_result(msg["id"], {"ok": True, "removed": removed})
+        def _rm() -> tuple[int, int]:
+            if not target.is_dir():
+                return 0, 0
+            removed = kept = 0
+            for item in sorted(target.iterdir()):
+                if not item.is_file():
+                    continue
+                if f"{mid}/{item.name}" in refs:
+                    kept += 1
+                    continue
+                try:
+                    item.unlink()
+                    removed += 1
+                except OSError as err:
+                    _LOGGER.warning("House Plan: could not remove %s: %s", item, err)
+            if not kept:
+                try:
+                    target.rmdir()
+                except OSError:
+                    pass
+            return removed, kept
+
+        removed, kept = await hass.async_add_executor_job(_rm)
+    if kept:
+        _LOGGER.info(
+            "House Plan: kept %s file(s) in %s — the configuration still references them", kept, mid
+        )
+    connection.send_result(msg["id"], {"ok": True, "removed": removed, "kept": kept})
 
 
 @websocket_api.websocket_command(

demo/srv/assets/houseplan-card.js

@@ -2561,4 +2561,4 @@ const t=globalThis,e=t.ShadowRoot&&(void 0===t.ShadyCSS||t.ShadyCSS.nativeShadow
               </button>`}
         </div>
       </div>
-    </div>`}}ps.properties={hass:{attribute:!1},_config:{state:!0},_space:{state:!0},_layout:{state:!0},_devices:{state:!0},_tip:{state:!0},_selId:{state:!0},_toast:{state:!0},_serverCfg:{state:!0},_mode:{state:!0},_tool:{state:!0},_path:{state:!0},_cursorPt:{state:!0},_mergeSel:{state:!0},_openingDialog:{state:!0},_openingInfo:{state:!0},_mergeDialog:{state:!0},_splitSel:{state:!0},_decorTool:{state:!0},_decorStyle:{state:!0},_decorDraft:{state:!0},_decorSel:{state:!0},_decorTextDialog:{state:!0},_kioskDialog:{state:!0},_kioskDots:{state:!0},_areaSel:{state:!0},_nameSel:{state:!0},_roomDialog:{state:!0},_roomEditId:{state:!0},_roomFill:{state:!0},_roomTempSrc:{state:!0},_roomHumSrc:{state:!0},_roomSrcOpen:{state:!0},_roomSrcFilter:{state:!0},_roomNameScale:{state:!0},_roomLabelScale:{state:!0},_spaceDialog:{state:!0},_infoCard:{state:!0},_rulesDialog:{state:!0},_settingsDialog:{state:!0},_importDialog:{state:!0},_markerDialog:{state:!0},_zoom:{state:!0},_view:{state:!0}},ps._touchSeen=!1,ps._noHoverMq="undefined"!=typeof window&&"function"==typeof window.matchMedia&&window.matchMedia("(hover: none)").matches,ps.styles=Ui,customElements.get("houseplan-card")||customElements.define("houseplan-card",ps),window.customCards=window.customCards||[],window.customCards.find(t=>"houseplan-card"===t.type)||window.customCards.push({type:"houseplan-card",name:"House Plan Card",description:"Interactive house plan: spaces, rooms and devices with live states and drag layout."}),console.info("%c HOUSEPLAN-CARD %c v1.46.2 ","background:#3ea6ff;color:#04121f;font-weight:700","");
+    </div>`}}ps.properties={hass:{attribute:!1},_config:{state:!0},_space:{state:!0},_layout:{state:!0},_devices:{state:!0},_tip:{state:!0},_selId:{state:!0},_toast:{state:!0},_serverCfg:{state:!0},_mode:{state:!0},_tool:{state:!0},_path:{state:!0},_cursorPt:{state:!0},_mergeSel:{state:!0},_openingDialog:{state:!0},_openingInfo:{state:!0},_mergeDialog:{state:!0},_splitSel:{state:!0},_decorTool:{state:!0},_decorStyle:{state:!0},_decorDraft:{state:!0},_decorSel:{state:!0},_decorTextDialog:{state:!0},_kioskDialog:{state:!0},_kioskDots:{state:!0},_areaSel:{state:!0},_nameSel:{state:!0},_roomDialog:{state:!0},_roomEditId:{state:!0},_roomFill:{state:!0},_roomTempSrc:{state:!0},_roomHumSrc:{state:!0},_roomSrcOpen:{state:!0},_roomSrcFilter:{state:!0},_roomNameScale:{state:!0},_roomLabelScale:{state:!0},_spaceDialog:{state:!0},_infoCard:{state:!0},_rulesDialog:{state:!0},_settingsDialog:{state:!0},_importDialog:{state:!0},_markerDialog:{state:!0},_zoom:{state:!0},_view:{state:!0}},ps._touchSeen=!1,ps._noHoverMq="undefined"!=typeof window&&"function"==typeof window.matchMedia&&window.matchMedia("(hover: none)").matches,ps.styles=Ui,customElements.get("houseplan-card")||customElements.define("houseplan-card",ps),window.customCards=window.customCards||[],window.customCards.find(t=>"houseplan-card"===t.type)||window.customCards.push({type:"houseplan-card",name:"House Plan Card",description:"Interactive house plan: spaces, rooms and devices with live states and drag layout."}),console.info("%c HOUSEPLAN-CARD %c v1.46.6 ","background:#3ea6ff;color:#04121f;font-weight:700","");

dist/houseplan-card.js

@@ -2561,4 +2561,4 @@ const t=globalThis,e=t.ShadowRoot&&(void 0===t.ShadyCSS||t.ShadyCSS.nativeShadow
               </button>`}
         </div>
       </div>
-    </div>`}}ps.properties={hass:{attribute:!1},_config:{state:!0},_space:{state:!0},_layout:{state:!0},_devices:{state:!0},_tip:{state:!0},_selId:{state:!0},_toast:{state:!0},_serverCfg:{state:!0},_mode:{state:!0},_tool:{state:!0},_path:{state:!0},_cursorPt:{state:!0},_mergeSel:{state:!0},_openingDialog:{state:!0},_openingInfo:{state:!0},_mergeDialog:{state:!0},_splitSel:{state:!0},_decorTool:{state:!0},_decorStyle:{state:!0},_decorDraft:{state:!0},_decorSel:{state:!0},_decorTextDialog:{state:!0},_kioskDialog:{state:!0},_kioskDots:{state:!0},_areaSel:{state:!0},_nameSel:{state:!0},_roomDialog:{state:!0},_roomEditId:{state:!0},_roomFill:{state:!0},_roomTempSrc:{state:!0},_roomHumSrc:{state:!0},_roomSrcOpen:{state:!0},_roomSrcFilter:{state:!0},_roomNameScale:{state:!0},_roomLabelScale:{state:!0},_spaceDialog:{state:!0},_infoCard:{state:!0},_rulesDialog:{state:!0},_settingsDialog:{state:!0},_importDialog:{state:!0},_markerDialog:{state:!0},_zoom:{state:!0},_view:{state:!0}},ps._touchSeen=!1,ps._noHoverMq="undefined"!=typeof window&&"function"==typeof window.matchMedia&&window.matchMedia("(hover: none)").matches,ps.styles=Ui,customElements.get("houseplan-card")||customElements.define("houseplan-card",ps),window.customCards=window.customCards||[],window.customCards.find(t=>"houseplan-card"===t.type)||window.customCards.push({type:"houseplan-card",name:"House Plan Card",description:"Interactive house plan: spaces, rooms and devices with live states and drag layout."}),console.info("%c HOUSEPLAN-CARD %c v1.46.2 ","background:#3ea6ff;color:#04121f;font-weight:700","");
+    </div>`}}ps.properties={hass:{attribute:!1},_config:{state:!0},_space:{state:!0},_layout:{state:!0},_devices:{state:!0},_tip:{state:!0},_selId:{state:!0},_toast:{state:!0},_serverCfg:{state:!0},_mode:{state:!0},_tool:{state:!0},_path:{state:!0},_cursorPt:{state:!0},_mergeSel:{state:!0},_openingDialog:{state:!0},_openingInfo:{state:!0},_mergeDialog:{state:!0},_splitSel:{state:!0},_decorTool:{state:!0},_decorStyle:{state:!0},_decorDraft:{state:!0},_decorSel:{state:!0},_decorTextDialog:{state:!0},_kioskDialog:{state:!0},_kioskDots:{state:!0},_areaSel:{state:!0},_nameSel:{state:!0},_roomDialog:{state:!0},_roomEditId:{state:!0},_roomFill:{state:!0},_roomTempSrc:{state:!0},_roomHumSrc:{state:!0},_roomSrcOpen:{state:!0},_roomSrcFilter:{state:!0},_roomNameScale:{state:!0},_roomLabelScale:{state:!0},_spaceDialog:{state:!0},_infoCard:{state:!0},_rulesDialog:{state:!0},_settingsDialog:{state:!0},_importDialog:{state:!0},_markerDialog:{state:!0},_zoom:{state:!0},_view:{state:!0}},ps._touchSeen=!1,ps._noHoverMq="undefined"!=typeof window&&"function"==typeof window.matchMedia&&window.matchMedia("(hover: none)").matches,ps.styles=Ui,customElements.get("houseplan-card")||customElements.define("houseplan-card",ps),window.customCards=window.customCards||[],window.customCards.find(t=>"houseplan-card"===t.type)||window.customCards.push({type:"houseplan-card",name:"House Plan Card",description:"Interactive house plan: spaces, rooms and devices with live states and drag layout."}),console.info("%c HOUSEPLAN-CARD %c v1.46.6 ","background:#3ea6ff;color:#04121f;font-weight:700","");

docs/ARCHITECTURE.md

@@ -207,8 +207,29 @@ happen when somebody saves, and a file uploaded into a dialog that was then
 cancelled would wait for a write that may never come. A new icon has no id yet, so its
 files go to a per-dialog staging folder and move to the real id once the config
 write is accepted — the same copy → save → cleanup order as a rebind.
-`config/set` collects what its commit superseded, and anything unreferenced and
-older than `PLAN_ORPHAN_TTL_S`.
+`config/set` collects what its commit superseded — that much a commit knows for
+certain. *Unreferenced* is a far weaker signal, and the policy follows from one
+asymmetry: **a few unnecessary megabytes can always be removed by hand; a file
+we should not have removed cannot be brought back.** When the evidence is weak,
+keep the file. Owner's decision, 2026-07-28, after the one-hour rule applied to
+every unreferenced file destroyed two detached plans.
+
+The classification is by **owner**, not by "is it referenced". A file leaving
+the configuration looks identical whether the plan was replaced, detached, or
+its space deleted — and only the first is a deletion the user asked for. Reading
+`old_refs - new_refs` and calling it "superseded" deleted a plan the moment it
+was detached, under documentation promising the opposite (HP-1465-01).
+
+| Case | What it means | Rule |
+|---|---|---|
+| Space in both, plan A → plan B | the user picked another image | removed immediately |
+| Space in both, plan → none | detached; one click undoes it | **kept** |
+| Space gone | deliberate, but the image was imported and may be nowhere else | **kept** |
+| Space has a plan, plus another file of its own | an upload whose save was rejected | **kept** — ageing these out raced the retry that referenced them |
+| Marker in both, attachment dropped from its list | a trash button, promising nothing | removed immediately |
+| Marker gone | same call as a deleted space's plan | **kept** |
+| Attachment in `up_*` | a dialog that was never saved; no device owns it | `PLAN_ORPHAN_TTL_S` (1 h) |
+| Marker there, file it never listed | a rejected upload | **kept**, same reason |
 
 **Config writes are serialized** (HP-1454-03). `_writeConfig()` chains onto a
 single promise: one `config/set` in flight, each carrying the revision the

docs/CHANGELOG.md

@@ -1,5 +1,81 @@
 # Changelog
 
+## v1.46.6 — 2026-07-28 (the detach promise, actually kept this time)
+- **Switching a space to "draw" no longer deletes its image.** v1.46.4 and
+  v1.46.5 said it did not, and the scheduled cleanup indeed left detached plans
+  alone — but the save itself deleted the file the moment the reference was
+  cleared, before any of those guards were reached. The cause: a file that left
+  the configuration was called "superseded", and from that difference alone
+  replacing a plan, detaching one and deleting its space are indistinguishable.
+  Only the first is a deletion anybody asked for. The transition is now
+  classified by the space that owned the file, and the same distinction applies
+  to attachments: dropping one from a device that still exists removes it,
+  deleting the device keeps its manuals.
+- **A plan whose space was deleted is kept**, rather than the thirty days
+  v1.46.5 promised — thirty days measured from the file's age is meaningless
+  anyway, since it was usually uploaded months earlier.
+- **Nothing is deleted for being old any more**, except a per-dialog staging
+  folder. The rule that aged out "rejected uploads" turned out to race a retry:
+  the cleanup removed the file from a failed save while the next attempt was
+  committing a reference to it. A rule that can delete a file somebody is about
+  to point at is not worth the disk it reclaims. Files therefore go when an
+  action says so, and otherwise stay.
+
+## v1.46.5 — 2026-07-28 (audit of every automatic deletion)
+- **A detached plan is never deleted, at any age.** v1.46.4 gave it a month;
+  this makes it permanent and writes the reason down where the next change will
+  see it. The rule, now in docs/SCOPE.md: the component may delete a file only
+  when a user action says so — replacing a plan, removing an attachment,
+  deleting a device. "Nothing points at this any more" is not such an action.
+  The errors are not symmetrical: wasted disk is visible, cheap and reversible;
+  a deleted file is none of those.
+- **`houseplan/files/cleanup` no longer takes a folder on the client's word.**
+  After a device is rebound its files are copied to the new id and the old
+  folder is dropped — with `rmtree`, on whatever id the card sent. Two ways that
+  ends badly: a partial copy leaves some urls still pointing into that folder
+  (the migration deliberately does not rewrite those, so they were live links to
+  files being deleted), and a wrong or stale id from any client would destroy a
+  live device's manuals. The server now checks the stored configuration itself,
+  under the config lock, and removes only files nothing references.
+- **A plan of a space that was deleted waits thirty days instead of an hour.**
+  Deleting a space is deliberate, but an hour is a short window in which to
+  notice it was a misclick.
+
+## v1.46.4 — 2026-07-28 (data loss: detached plans were collected as garbage)
+- **A plan you detach is no longer deleted an hour later.** Switching a space to
+  "draw" clears the reference and, as the editor has always said, leaves the
+  image on disk so you can put it back. The collection added in v1.46.0 did not
+  make that distinction: it treated "nothing points at this right now" as
+  abandoned and applied a one-hour rule. On the author's own instance the
+  scheduled pass then removed two floor plans that had been detached weeks
+  earlier, with no way to get them back. If you have detached a plan since
+  v1.46.0 and your instance restarted or ran for a day, check
+  `config/houseplan/plans/` before updating anything else — and please report it
+  in the Telegram chat if a file is missing.
+  The rule now: **a commit still removes exactly what it replaced**, because
+  that it knows for certain. Beyond that the question is whether "unreferenced"
+  means "abandoned", and the answer depends on the case. A space with no plan at
+  all has had one detached and may want it back — its files are never collected.
+  A space that does have a plan can only be holding rejected uploads of its own,
+  so those still go after an hour. Attachments outside a per-dialog staging
+  folder wait a month; a staging folder, which by construction only ever holds
+  an upload from a dialog that was never saved, keeps the one-hour rule.
+
+## v1.46.3 — 2026-07-28 (re-check of v1.46.2: HP-1462-01)
+- **The cleanup at startup now actually cleans up.** It looked its own runtime
+  data up by domain, and during startup Home Assistant does not yet consider
+  the integration loaded — so the lookup came back empty and the pass quietly
+  degraded to removing half-finished transfers, leaving the real work to a timer
+  24 hours away. Restart more often than that and it never ran at all. It uses
+  the object it was given at startup now.
+- **The test that was supposed to prove this was passing for the wrong
+  reason.** It created the stray files *before* saving the configuration — and
+  saving collects too, so everything was already gone by the time the restart
+  happened. Rewritten to seed after the save, plus a second test that fires the
+  scheduled timer on its own, and a third that runs a restart and a save at the
+  same time and asserts the accepted configuration never points at a file the
+  cleanup removed.
+
 ## v1.46.2 — 2026-07-28 (re-check of v1.46.1: HP-1461-01, -02)
 - **A file nobody ended up using is now cleaned up even if nothing is ever
   saved again (HP-1461-01).** Collection is tied to a configuration write,

docs/CHANGELOG.ru.md

@@ -6,6 +6,82 @@
 > **Правило проекта:** оба файла пополняются в одном коммите с самим
 > изменением — как и остальная документация (см. docs/STATUS.md).
 
+## v1.46.6 — 2026-07-28 (обещание про отцепление, теперь выполненное)
+- **Переключение пространства в «нарисовать» больше не удаляет его картинку.**
+  v1.46.4 и v1.46.5 утверждали, что не удаляет, и плановая уборка действительно
+  отцеплённые планы не трогала — но само сохранение удаляло файл в тот момент,
+  когда снималась ссылка, ещё до всех этих проверок. Причина: файл, покинувший
+  конфигурацию, считался «заменённым», а по одной этой разнице замену плана,
+  отцепление и удаление пространства различить невозможно. Удалением, о котором
+  просили, является только первое. Теперь переход классифицируется по
+  пространству-владельцу, и та же разница применяется к вложениям: убрали файл у
+  существующего устройства — он удаляется, удалили устройство — его инструкции
+  остаются.
+- **План удалённого пространства сохраняется**, а не тридцать дней, как обещала
+  v1.46.5: тридцать дней по возрасту файла всё равно бессмысленны — обычно он
+  загружен месяцы назад.
+- **По возрасту больше не удаляется ничего**, кроме промежуточной папки диалога.
+  Правило, которое вычищало «отвергнутые загрузки», оказалось в гонке с
+  повторной попыткой: уборка удаляла файл неудавшегося сохранения ровно тогда,
+  когда следующая попытка коммитила ссылку на него. Правило, способное удалить
+  файл, на который кто-то вот-вот сошлётся, не стоит освобождаемого места.
+  Файлы уходят по действию, в остальных случаях остаются.
+
+## v1.46.5 — 2026-07-28 (ревизия всех автоматических удалений)
+- **Отцеплённый план не удаляется никогда, ни в каком возрасте.** В v1.46.4 ему
+  давался месяц; теперь это навсегда, и причина записана там, где её увидит
+  следующая правка. Правило, оно же в docs/SCOPE.md: компонент вправе удалить
+  файл только тогда, когда об этом говорит действие пользователя — замена
+  плана, удаление вложения, удаление устройства. «На это больше никто не
+  ссылается» таким действием не является. Ошибки несимметричны: занятое зря
+  место видно, стоит копейки и обратимо; удалённый файл — ничего из этого.
+- **`houseplan/files/cleanup` больше не сносит папку по слову клиента.** После
+  перепривязки устройства файлы копируются под новый id, а старая папка
+  удалялась — через `rmtree`, по тому id, который прислала карточка. Два плохих
+  исхода: при частичном копировании часть ссылок продолжает указывать внутрь
+  этой папки (миграция намеренно их не переписывает — то есть это были живые
+  ссылки на удаляемые файлы), а неверный или устаревший id от любого клиента
+  уничтожил бы инструкции существующего устройства. Теперь сервер сам сверяется
+  с сохранённой конфигурацией, под её блокировкой, и удаляет только то, на что
+  никто не ссылается.
+- **План удалённого пространства ждёт тридцать дней вместо часа.** Удаление
+  пространства осознанно, но час — короткое окно, чтобы заметить промах.
+
+## v1.46.4 — 2026-07-28 (потеря данных: отцеплённые планы убирались как мусор)
+- **Отцеплённый план больше не удаляется через час.** Переключение пространства
+  в режим «нарисовать» снимает ссылку и, как редактор всегда и говорил,
+  оставляет картинку на диске, чтобы её можно было вернуть. Уборка, добавленная
+  в v1.46.0, этой разницы не делала: считала «на файл сейчас никто не
+  ссылается» синонимом «файл брошен» и применяла часовое правило. На установке
+  автора плановый проход в итоге удалил два плана этажей, отцеплённых
+  несколькими неделями раньше, — восстановить их было нечем. Если вы отцепляли
+  план после v1.46.0 и инстанс перезапускался или проработал сутки — загляните в
+  `config/houseplan/plans/` и напишите в Telegram-чат, если файла нет.
+  Правило теперь такое: **коммит по-прежнему удаляет ровно то, что заменил**, —
+  это он знает наверняка. Дальше вопрос в том, означает ли «непривязан»
+  «брошен», и ответ зависит от случая. У пространства, у которого плана нет
+  вовсе, его отцепили — и, возможно, вернут: его файлы не удаляются никогда. У
+  пространства, у которого план есть, лишние файлы могут быть только его же
+  отвергнутыми загрузками — они по-прежнему уходят через час. Вложения вне
+  промежуточной папки диалога ждут месяц; сама промежуточная папка, где по
+  построению лежит только загрузка из несохранённого диалога, сохраняет часовое
+  правило.
+
+## v1.46.3 — 2026-07-28 (перепроверка v1.46.2: HP-1462-01)
+- **Уборка при старте действительно убирает.** Она искала свои же runtime-данные
+  по домену, а во время запуска Home Assistant ещё не считает интеграцию
+  загруженной — поэтому поиск возвращал пустоту, и проход тихо вырождался в
+  удаление незавершённых передач, оставляя настоящую работу таймеру через
+  24 часа. При перезапусках чаще, чем раз в сутки, она не выполнялась вообще.
+  Теперь используется объект, который у неё и так был на руках.
+- **Тест, который должен был это доказать, проходил по неверной причине.** Он
+  создавал лишние файлы *до* сохранения конфигурации, а сохранение тоже
+  собирает мусор — так что к моменту перезапуска убирать было уже нечего.
+  Переписан: файлы создаются после сохранения; добавлен второй тест, который
+  дёргает плановый таймер отдельно, и третий, который запускает перезапуск и
+  сохранение одновременно и проверяет, что принятая конфигурация никогда не
+  ссылается на удалённый уборкой файл.
+
 ## v1.46.2 — 2026-07-28 (перепроверка v1.46.1: HP-1461-01, -02)
 - **Файл, который в итоге никому не понадобился, убирается, даже если больше
   ничего не сохраняют (HP-1461-01).** Сборка привязана к записи конфигурации —

docs/SCOPE.md

@@ -66,6 +66,18 @@ refuse locks or be added to this paragraph.
 - Plan-level "security glance": one badge for "all locked / N open" (J2).
 - Threshold colouring for room-card metrics (J5).
 
+## Standing rule: never delete a user's file on an inference
+
+Fixed with the owner on 2026-07-28, after automatic collection removed two
+detached floor plans. The component may delete a file only when the user's
+action says so — replacing a plan, removing an attachment, deleting a device.
+"Nothing points at this any more" is not such an action: detaching a plan is one
+click and reversible, and the editor tells the user the file stays.
+
+The asymmetry is the whole argument. Wasted disk is visible, cheap and
+reversible; a deleted file is none of those. Where the evidence is weak, keep
+the file — and if a future version wants to reclaim that space, it asks.
+
 ## Out of scope — never build, point users to the right tool
 
 - Automations, scenes, scripts, notifications → HA core.

docs/STATUS.md

@@ -15,12 +15,12 @@
 
 | Item | State |
 |---|---|
-| Version | **v1.46.2** everywhere (manifest, const.py, package.json, CARD_VERSION); deployed to the home instance |
+| Version | **v1.46.6** everywhere (manifest, const.py, package.json, CARD_VERSION); deployed to the home instance |
 | Workflow | Since 2026-07-22: minor changes go to branch **`dev`** (build + smokes → deploy home → commit → push, NO release); releases are batched on the owner's command (merge dev→main, one tag, one release with a summary changelog, CI checked on dev beforehand) |
 | GitHub | https://github.com/Matysh/houseplan-card — **`main` carries every published release, the latest tag is the current version above**; `dev` is where work lands and is merged into `main` at release time (so `dev` is normally equal to or ahead of `main`, never behind). Push via SSH key `ha_jb` (remote git@github.com:…); API releases via the fine-grained PAT in `~/.git-credentials` (Contents R/W, issued 2026-07-23) |
 | CI | validate.yml (hacs + hassfest + frontend + backend) green; release.yml attaches the bundle on release publish |
 | HACS | Custom repository works. **Inclusion PR: hacs/default#9004** — open, valid, labeled; ~864 older open PRs but merge rate ≈180/mo; realistic ETA 1–3 months (checked 2026-07-24) |
-| Home instance | ha.jbstudio.pro (SSH port 323, key `ha_jb`), deployed **v1.46.2** via direct copy (HACS custom repo also installed) |
+| Home instance | ha.jbstudio.pro (SSH port 323, key `ha_jb`), deployed **v1.46.6** via direct copy (HACS custom repo also installed) |
 | Localization | UI en/ru (src/i18n/*.json), everything user-visible localized incl. kiosk popover |
 | Tests | Four layers: frontend unit (`npm test`, node:test over `test-build/`), pure backend (`pytest tests_backend`, runs anywhere), HA-harness backend (same folder, CI only — needs py3.13 + pytest-homeassistant-custom-component), and browser smokes (`demo/smoke_*.mjs`, headless chromium). **Counts are not written down here** — they went stale within two releases while the version line beside them was kept current, which reads as less coverage than exists (review R5-2). Run `npm run inventory` for the current numbers, or read them off the last CI run |
 | Community | **Telegram chat: https://t.me/ha_houseplan** (created 2026-07-27) — the primary user-facing support channel; GitHub issues stay for bugs/features. Link it from any new release notes and posts |

docs/TESTING.md

@@ -239,11 +239,26 @@ Run the *core flows* (marked ★ below) in each environment at least once per mi
       on the plan after a reload. Same for each tap action and each fill mode
       [auto: backend test_every_display_mode_the_editor_offers_is_accepted and
       neighbours, test_a_marker_showing_its_value_can_be_saved]
-- [ ] Nothing accumulates on an idle instance (v1.46.2, HP-1461-01): attach a
-      file, cancel the dialog, and do not save anything else — an hour later (or
-      after a restart) the file is gone, while every file the configuration
-      still references is untouched
-      [auto: backend test_scheduled_sweep_collects_what_no_commit_will]
+- [ ] Detaching a plan keeps the file (v1.46.6): switch a space to "draw" and
+      SAVE — the image is still in `config/houseplan/plans/` right afterwards,
+      and after a restart, and can be re-attached. Deleting the space keeps it
+      too. Replacing a plan still removes the one it replaced, immediately.
+      Check straight after the save: the earlier bug deleted the file at that
+      moment, while every scheduled-pass test passed
+      [auto: unit: test_plan_collection_matrix, test_attachment_collection_matrix,
+      backend test_detaching_a_plan_keeps_the_file]
+- [ ] Rebinding a device does not eat its manuals (v1.46.5): attach two files to
+      a device, rebind it to another HA device — both are readable afterwards.
+      If a copy failed, the file it failed on is still there rather than deleted
+      with the folder [auto: backend test_files_cleanup_keeps_referenced_files]
+- [ ] Nothing accumulates on an idle instance (v1.46.2/v1.46.3, HP-1461-01,
+      HP-1462-01): attach a file, cancel the dialog, and do not save anything
+      else — the file is gone after a restart AND after the daily pass, while
+      every file the configuration still references is untouched. Seed the
+      strays AFTER the last save, or `config/set` collects them and the check
+      proves nothing
+      [auto: backend test_startup_sweep_collects_what_no_commit_will,
+      test_daily_sweep_callback_collects_too, test_sweep_and_a_config_write_do_not_race]
 - [ ] A drag wins over a concurrent remote move (v1.46.2, HP-1461-02): drag an
       icon and, while the save is still in flight, have another window move a
       different icon — your icon stays where you put it and the other one

package.json

@@ -1,6 +1,6 @@
 {
   "name": "houseplan-card",
-  "version": "1.46.2",
+  "version": "1.46.6",
   "description": "Interactive house plan Lovelace card for Home Assistant",
   "license": "MIT",
   "type": "module",

src/houseplan-card.ts

@@ -35,7 +35,7 @@ import './space-card';
 import { cardStyles } from './styles';
 import { langOf, t, type I18nKey } from './i18n';
 
-const CARD_VERSION = '1.46.2';
+const CARD_VERSION = '1.46.6';
 const LS_KEY = 'houseplan_card_layout_v1';
 const LS_CFG = 'houseplan_card_cfg_v1'; // cache of the server config+layout for instant rendering
 const LS_ZOOM = 'houseplan_card_zoom_v1';

tests_backend/test_ha_websocket.py

@@ -176,10 +176,12 @@ async def test_files_migrate_copies_and_reports_mapping(
     assert src_kept, "migrate must COPY, not move (review CR-2)"
     assert other == b"OTHER" and copied == b"SOURCE"
 
-    # cleanup runs only after the config is safely committed
+    # cleanup runs only after the config is safely committed, and since v1.46.5
+    # reports how many files it removed rather than a bare boolean — it now also
+    # keeps anything the stored configuration still references
     await client.send_json_auto_id({"type": "houseplan/files/cleanup", "marker_id": "old1"})
     resp2 = await client.receive_json()
-    assert resp2["success"] and resp2["result"]["removed"] is True
+    assert resp2["success"] and resp2["result"]["removed"] >= 1 and resp2["result"]["kept"] == 0
     assert not await hass.async_add_executor_job(lambda: os.path.isdir(src))
 
 
@@ -340,34 +342,41 @@ async def test_commit_does_not_collect_another_client_s_uncommitted_upload(
     assert not (plans / pa).exists()
 
 
-async def test_abandoned_uploads_are_collected_once_old(
+async def test_a_rejected_upload_is_kept_not_aged_out(
     hass: HomeAssistant, hass_ws_client: WebSocketGenerator
 ) -> None:
-    """A rejected upload must not accumulate forever — but only age may free it."""
+    """v1.46.6: age is never a reason to delete a plan file.
+
+    It used to be, for "a file of a space that has a plan and never was one" —
+    an upload whose save had failed. That raced the retry: the sweep removed the
+    file while the next save was committing a reference to it. Keeping it costs
+    a few megabytes nobody can lose.
+    """
     import os
     import time
-    from pathlib import Path
 
-    from custom_components.houseplan.const import PLANS_DIR, PLAN_ORPHAN_TTL_S
+    from custom_components.houseplan.const import PLANS_DIR, SCHEDULED_GRACE_S
+    from custom_components.houseplan.store import get_data
 
     await _setup(hass)
     client = await hass_ws_client(hass)
-    plans = Path(hass.config.path(PLANS_DIR))
-    plans.mkdir(parents=True, exist_ok=True)
-    for stale in plans.glob("r3.*"):
-        stale.unlink()
+    plans = hass.config.path(PLANS_DIR)
 
     url0, p0 = await _upload(client, "r3", b"zero")
     rev = (await _save(client, await _cfg([{"id": "r3", "plan_url": url0}]), 0))["result"]["rev"]
 
-    _url, orphan = await _upload(client, "r3", b"abandoned")
-    old = time.time() - PLAN_ORPHAN_TTL_S - 60
-    os.utime(plans / orphan, (old, old))
+    _url, orphan = await _upload(client, "r3", b"never saved")
+    old = time.time() - SCHEDULED_GRACE_S * 12
+    os.utime(os.path.join(plans, orphan), (old, old))
 
-    ok = await _save(client, await _cfg([{"id": "r3", "plan_url": url0}]), rev)
-    assert ok["success"]
-    assert not (plans / orphan).exists(), "an aged, unreferenced upload is collected"
-    assert (plans / p0).is_file(), "the referenced plan is never touched"
+    # a commit, and the scheduled pass, and any amount of age: it stays
+    assert (await _save(client, await _cfg([{"id": "r3", "plan_url": url0}]), rev))["success"]
+    data = get_data(hass)
+    await data.sweep()
+    await hass.async_block_till_done()
+
+    assert await hass.async_add_executor_job(os.path.isfile, os.path.join(plans, orphan))
+    assert await hass.async_add_executor_job(os.path.isfile, os.path.join(plans, p0))
 
 
 async def test_collection_ignores_files_that_are_not_plans(
@@ -609,7 +618,8 @@ async def test_layout_keeps_its_revision_and_announces_changes(
     assert not bad["success"] and bad["error"]["code"] == "conflict"
 
     await hass.async_block_till_done()
-    assert [e["rev"] for e in events] == [1, 2, 3]
+    # the bus does not promise ordering between separately fired events
+    assert sorted(e["rev"] for e in events) == [1, 2, 3]
 
 
 async def test_uploaded_svg_is_sandboxed_and_a_pdf_is_not(
@@ -855,61 +865,250 @@ async def test_cancelling_an_upload_takes_its_temporary_with_it(
     assert entry
 
 
-async def test_scheduled_sweep_collects_what_no_commit_will(
-    hass: HomeAssistant, hass_ws_client: WebSocketGenerator
-) -> None:
-    """HP-1461-01: a commit collects what it superseded — but only when it runs.
-
-    Cancel a dialog after the file uploaded, or lose the connection right after,
-    and nothing references the file and no future write notices it. The daily
-    sweep used to remove only streaming temporaries, so the promise that a
-    cancelled attachment goes after an hour did not hold on an instance nobody
-    edits.
-    """
+async def _seed_aged(hass, names) -> None:
+    """Create the given files and backdate them past the orphan TTL."""
     import os
     import time
 
-    from custom_components.houseplan.const import FILES_DIR, PLANS_DIR, PLAN_ORPHAN_TTL_S
+    from custom_components.houseplan.const import SCHEDULED_GRACE_S
 
-    await _setup(hass)
-    client = await hass_ws_client(hass)
-    files = hass.config.path(FILES_DIR)
-    plans = hass.config.path(PLANS_DIR)
-    old = time.time() - PLAN_ORPHAN_TTL_S - 60
+    old = time.time() - SCHEDULED_GRACE_S - 60  # past every grace
 
-    def _seed() -> None:
-        os.makedirs(os.path.join(files, "m5"), exist_ok=True)
-        os.makedirs(os.path.join(files, "up_cancelled"), exist_ok=True)
-        os.makedirs(plans, exist_ok=True)
-        for path in (
-            os.path.join(files, "m5", "kept.pdf"),
-            os.path.join(files, "up_cancelled", "manual.pdf"),
-            os.path.join(plans, "s5.tok.png"),
-            os.path.join(plans, "s5.orphan.png"),
-        ):
+    def _do() -> None:
+        for path in names:
+            os.makedirs(os.path.dirname(path), exist_ok=True)
             with open(path, "wb") as fh:
                 fh.write(b"x")
             os.utime(path, (old, old))
 
-    await hass.async_add_executor_job(_seed)
+    await hass.async_add_executor_job(_do)
 
+
+def _paths(hass):
+    import os
+
+    from custom_components.houseplan.const import FILES_DIR, PLANS_DIR
+
+    files = hass.config.path(FILES_DIR)
+    plans = hass.config.path(PLANS_DIR)
+    return files, plans, {
+        "kept_file": os.path.join(files, "m5", "kept.pdf"),
+        "kept_plan": os.path.join(plans, "s5.tok.png"),
+        "orphan_file": os.path.join(files, "up_cancelled", "manual.pdf"),
+        # a plan file is never collected by age any more; keep one around and
+        # assert exactly that
+        "kept_reject": os.path.join(plans, "s5.reject.png"),
+    }
+
+
+async def _referenced_config() -> dict:
     cfg = await _cfg([{"id": "s5", "plan_url": "/api/houseplan/content/plans/_/s5.tok.png"}])
     cfg["markers"] = [
         {"id": "m5", "binding": "virtual",
          "pdfs": [{"name": "k", "url": "/api/houseplan/content/files/m5/kept.pdf"}]}
     ]
-    assert (await _save(client, cfg, 0))["success"]
+    return cfg
+
+
+async def _assert_swept(hass, p) -> None:
+    import os
+
+    assert await hass.async_add_executor_job(os.path.isfile, p["kept_file"]), "referenced file kept"
+    assert await hass.async_add_executor_job(os.path.isfile, p["kept_plan"]), "referenced plan kept"
+    assert not await hass.async_add_executor_job(os.path.isfile, p["orphan_file"]), (
+        "a staging folder from a dialog nobody saved is the one thing age collects"
+    )
+    assert await hass.async_add_executor_job(os.path.isfile, p["kept_reject"]), (
+        "a plan file is never removed for being old"
+    )
+
+
+async def test_startup_sweep_collects_what_no_commit_will(
+    hass: HomeAssistant, hass_ws_client: WebSocketGenerator
+) -> None:
+    """HP-1461-01 / HP-1462-01: collection must not depend on a future save.
+
+    The files are seeded AFTER the configuration is stored. The previous version
+    of this test seeded them before, and `config/set` collects too — so it
+    passed without the startup pass doing anything, hiding HP-1462-01: during
+    setup the entry is not "loaded" yet, so looking its runtime data up by
+    domain returned None and the pass degraded to removing streaming
+    temporaries only.
+    """
+    import os
+
+    await _setup(hass)
+    client = await hass_ws_client(hass)
+    files, _plans, p = _paths(hass)
+    assert (await _save(client, await _referenced_config(), 0))["success"]
+
+    await _seed_aged(hass, list(p.values()))
 
-    # reload the entry: that is what runs the sweep at startup
     entry = hass.config_entries.async_entries(DOMAIN)[0]
     assert await hass.config_entries.async_reload(entry.entry_id)
     await hass.async_block_till_done()
 
-    exists = lambda p: os.path.isfile(p)  # noqa: E731
-    assert await hass.async_add_executor_job(exists, os.path.join(files, "m5", "kept.pdf"))
-    assert await hass.async_add_executor_job(exists, os.path.join(plans, "s5.tok.png"))
+    await _assert_swept(hass, p)
     assert not await hass.async_add_executor_job(
-        exists, os.path.join(files, "up_cancelled", "manual.pdf")
-    ), "an aged cancelled attachment is collected without any further config write"
-    assert not await hass.async_add_executor_job(exists, os.path.join(plans, "s5.orphan.png"))
-    assert not await hass.async_add_executor_job(os.path.isdir, os.path.join(files, "up_cancelled"))
+        os.path.isdir, os.path.join(files, "up_cancelled")
+    ), "the emptied staging folder goes with its last file"
+
+
+async def test_periodic_sweep_collects_too(
+    hass: HomeAssistant, hass_ws_client: WebSocketGenerator
+) -> None:
+    """The scheduled pass, invoked directly rather than by faking a 24 h jump.
+
+    Firing a time change proves the timer fires; awaiting the callback proves it
+    does the work. This asserts the second, which is the part that regressed.
+    """
+    from custom_components.houseplan.store import get_data
+
+    await _setup(hass)
+    client = await hass_ws_client(hass)
+    _files, _plans, p = _paths(hass)
+    assert (await _save(client, await _referenced_config(), 0))["success"]
+
+    await _seed_aged(hass, list(p.values()))
+
+    data = get_data(hass)
+    assert data is not None and data.sweep is not None, "setup must publish the sweep"
+    await data.sweep()
+    await hass.async_block_till_done()
+
+    await _assert_swept(hass, p)
+
+
+async def test_sweep_and_a_config_write_do_not_race(
+    hass: HomeAssistant, hass_ws_client: WebSocketGenerator
+) -> None:
+    """Both take the same write lock, so an accepted config cannot lose a file.
+
+    Without it the sweep could decide a file is unreferenced, a commit could
+    start referencing it, and the file would go — leaving the accepted revision
+    pointing at nothing.
+    """
+    import asyncio
+    import os
+
+    await _setup(hass)
+    client = await hass_ws_client(hass)
+    _files, plans, p = _paths(hass)
+    rev = (await _save(client, await _referenced_config(), 0))["result"]["rev"]
+
+    # an aged, currently unreferenced plan that the commit below adopts
+    newcomer = os.path.join(plans, "s5.newcomer.png")
+    await _seed_aged(hass, [p["kept_file"], p["kept_plan"], newcomer])
+
+    cfg2 = await _referenced_config()
+    cfg2["spaces"][0]["plan_url"] = "/api/houseplan/content/plans/_/s5.newcomer.png"
+
+    # Drive the sweep directly rather than through a reload: an entry reload has
+    # an unload window in which any WS call legitimately answers `not_ready`, so
+    # a save racing THAT proves nothing about the lock and fails at random.
+    from custom_components.houseplan.store import get_data
+
+    data = get_data(hass)
+    assert data is not None and data.sweep is not None
+    _swept, saved = await asyncio.gather(data.sweep(), _save(client, cfg2, rev))
+    await hass.async_block_till_done()
+
+    # assert the CONCRETE outcome: a save that came back `not_ready` would leave
+    # the old config pointing at the old file and satisfy a vaguer check
+    assert saved["success"], saved.get("error")
+    await client.send_json_auto_id({"type": "houseplan/config/get"})
+    stored = (await client.receive_json())["result"]["config"]
+    assert stored["spaces"][0]["plan_url"].endswith("s5.newcomer.png")
+    assert await hass.async_add_executor_job(
+        os.path.isfile, os.path.join(plans, "s5.newcomer.png")
+    ), "the file the accepted config points at must exist"
+
+
+async def test_files_cleanup_keeps_referenced_files(
+    hass: HomeAssistant, hass_ws_client: WebSocketGenerator
+) -> None:
+    """v1.46.5: the client may say what it no longer needs, never what may go.
+
+    `files/cleanup` used to rmtree the folder it was handed. A partial migration
+    leaves some urls pointing into that folder — the copy deliberately does not
+    rewrite the ones it could not confirm — so those were live links to files
+    being deleted. A wrong id from any client had the same effect on a device's
+    manuals.
+    """
+    import os
+
+    from custom_components.houseplan.const import FILES_DIR
+
+    await _setup(hass)
+    client = await hass_ws_client(hass)
+    folder = os.path.join(hass.config.path(FILES_DIR), "m7")
+
+    def _seed() -> None:
+        os.makedirs(folder, exist_ok=True)
+        for n in ("kept.pdf", "orphan.pdf"):
+            with open(os.path.join(folder, n), "wb") as fh:
+                fh.write(b"x")
+
+    await hass.async_add_executor_job(_seed)
+
+    cfg = await _cfg([{"id": "s7", "plan_url": None}])
+    cfg["markers"] = [
+        {"id": "other", "binding": "virtual",
+         "pdfs": [{"name": "k", "url": "/api/houseplan/content/files/m7/kept.pdf"}]}
+    ]
+    assert (await _save(client, cfg, 0))["success"]
+
+    await client.send_json_auto_id({"type": "houseplan/files/cleanup", "marker_id": "m7"})
+    resp = await client.receive_json()
+    assert resp["success"] and resp["result"] == {"ok": True, "removed": 1, "kept": 1}
+
+    assert await hass.async_add_executor_job(os.path.isfile, os.path.join(folder, "kept.pdf")), (
+        "a file the configuration still references survives a cleanup of its folder"
+    )
+    assert not await hass.async_add_executor_job(os.path.isfile, os.path.join(folder, "orphan.pdf"))
+
+
+async def test_detaching_a_plan_keeps_the_file(
+    hass: HomeAssistant, hass_ws_client: WebSocketGenerator
+) -> None:
+    """HP-1465-01, through the real save — where the earlier tests never looked.
+
+    Every check for this lived in the pure collector with old and new config
+    equal, i.e. the scheduled pass. The transition that matters is a save, and
+    there the file was deleted the moment the reference was cleared.
+    """
+    import os
+
+    from custom_components.houseplan.const import PLANS_DIR
+
+    await _setup(hass)
+    client = await hass_ws_client(hass)
+    plans = hass.config.path(PLANS_DIR)
+
+    url, name = await _upload(client, "d1", b"PLAN", ext="png")
+    rev = (await _save(client, await _cfg([{"id": "d1", "plan_url": url}]), 0))["result"]["rev"]
+    assert await hass.async_add_executor_job(os.path.isfile, os.path.join(plans, name))
+
+    # detach: the space stays, its plan does not
+    rev = (await _save(client, await _cfg([{"id": "d1", "plan_url": None}]), rev))["result"]["rev"]
+    assert await hass.async_add_executor_job(os.path.isfile, os.path.join(plans, name)), (
+        "the editor says the image stays on disk — it has to actually stay"
+    )
+
+    # a restart does not change its mind either
+    entry = hass.config_entries.async_entries(DOMAIN)[0]
+    assert await hass.config_entries.async_reload(entry.entry_id)
+    await hass.async_block_till_done()
+    assert await hass.async_add_executor_job(os.path.isfile, os.path.join(plans, name))
+
+    # re-attach, then replace: THAT removes the one it replaced
+    rev = (await _save(client, await _cfg([{"id": "d1", "plan_url": url}]), rev))["result"]["rev"]
+    url2, name2 = await _upload(client, "d1", b"NEWPLAN", ext="png")
+    rev = (await _save(client, await _cfg([{"id": "d1", "plan_url": url2}]), rev))["result"]["rev"]
+    assert await hass.async_add_executor_job(os.path.isfile, os.path.join(plans, name2))
+    assert not await hass.async_add_executor_job(os.path.isfile, os.path.join(plans, name))
+
+    # and deleting the space keeps its plan
+    await _save(client, await _cfg([]), rev)
+    await hass.async_block_till_done()
+    assert await hass.async_add_executor_job(os.path.isfile, os.path.join(plans, name2))

tests_backend/test_validation.py

@@ -265,17 +265,6 @@ def test_collect_plans_keeps_a_fresh_unreferenced_upload(tmp_path):
     assert (d / "f1.inflight.png").is_file()
 
 
-def test_collect_plans_takes_an_aged_orphan(tmp_path):
-    PLAN_ORPHAN_TTL_S = const.PLAN_ORPHAN_TTL_S
-    collect_plans = plans.collect_plans
-
-    d = _plans(tmp_path, ["f1.keep.png"])
-    _plans(tmp_path, ["f1.abandoned.png"], age=PLAN_ORPHAN_TTL_S + 60)
-    removed = collect_plans(d, _cfg("/p/f1.keep.png"), _cfg("/p/f1.keep.png"))
-    assert removed == 1
-    assert (d / "f1.keep.png").is_file() and not (d / "f1.abandoned.png").exists()
-
-
 def test_collect_plans_never_touches_a_referenced_or_foreign_file(tmp_path):
     PLAN_ORPHAN_TTL_S = const.PLAN_ORPHAN_TTL_S
     collect_plans = plans.collect_plans
@@ -477,31 +466,6 @@ def test_attachment_refs_reads_marker_urls():
     assert plans.attachment_refs(cfg) == set()
 
 
-def test_collect_attachments_supersedes_and_ages(tmp_path):
-    import os
-    import time
-
-    collect_attachments = plans.collect_attachments
-    files = tmp_path / "files"
-    (files / "m1").mkdir(parents=True)
-    for n in ("old.pdf", "new.pdf", "cancelled.pdf"):
-        (files / "m1" / n).write_bytes(b"x")
-
-    # the commit swapped old.pdf for new.pdf; cancelled.pdf is a fresh upload
-    # nobody saved — it may belong to a dialog that is still open
-    removed = collect_attachments(files, _acfg("m1/old.pdf"), _acfg("m1/new.pdf"))
-    assert removed == 1
-    assert not (files / "m1" / "old.pdf").exists()
-    assert (files / "m1" / "new.pdf").is_file()
-    assert (files / "m1" / "cancelled.pdf").is_file()
-
-    old = time.time() - const.PLAN_ORPHAN_TTL_S - 60
-    os.utime(files / "m1" / "cancelled.pdf", (old, old))
-    assert collect_attachments(files, _acfg("m1/new.pdf"), _acfg("m1/new.pdf")) == 1
-    assert not (files / "m1" / "cancelled.pdf").exists()
-    assert (files / "m1" / "new.pdf").is_file()
-
-
 def test_collect_attachments_removes_the_empty_folder_and_never_raises(tmp_path):
     import os
     import time
@@ -552,3 +516,153 @@ def test_legacy_segments_are_dropped_by_the_server():
         "segments": [[1, 2, 3, 4]] * 100000,
     })
     assert "segments" not in out
+
+
+def _aged(path, seconds):
+    import os
+    import time
+
+    t = time.time() - seconds
+    os.utime(path, (t, t))
+
+
+def _sp(sid, url):
+    return {"id": sid, "plan_url": f"/api/houseplan/content/plans/_/{url}" if url else None}
+
+
+def test_plan_collection_matrix(tmp_path):
+    """Which config transition means "the user asked for this file to go"?
+
+    `old_refs - new_refs` cannot tell replace, detach and delete-space apart —
+    they look identical. v1.46.4/v1.46.5 added guards for detach and only ever
+    reached them on the scheduled pass, so the commit itself still deleted a
+    detached plan the moment it was detached (HP-1465-01). One case is a
+    deletion the user asked for; the rest are kept.
+    """
+    collect = plans.collect_plans
+    d = tmp_path / "plans"
+    d.mkdir()
+
+    def seed(*names):
+        for n in names:
+            (d / n).write_bytes(b"x")
+            _aged(d / n, const.SCHEDULED_GRACE_S * 2)  # old enough for any rule
+
+    # 1. replace: the user picked a different image for the same space
+    seed("f1.old.png", "f1.new.png")
+    assert collect(d, {"spaces": [_sp("f1", "f1.old.png")]},
+                      {"spaces": [_sp("f1", "f1.new.png")]}) == 1
+    assert not (d / "f1.old.png").exists() and (d / "f1.new.png").is_file()
+
+    # 2. detach: same space, switched to "draw"
+    seed("f2.png")
+    assert collect(d, {"spaces": [_sp("f2", "f2.png")]},
+                      {"spaces": [_sp("f2", None)]}) == 0
+    assert (d / "f2.png").is_file(), "the editor says the file stays — it stays"
+
+    # 3. the space is deleted outright
+    seed("f3.png")
+    assert collect(d, {"spaces": [_sp("f3", "f3.png")]}, {"spaces": []}) == 0
+    assert (d / "f3.png").is_file()
+
+    # 4. the scheduled pass, later, still keeps both
+    cfg = {"spaces": [_sp("f2", None)]}
+    assert collect(d, cfg, cfg) == 0
+    assert (d / "f2.png").is_file() and (d / "f3.png").is_file()
+
+    # 5. an upload whose save was rejected is kept too, at any age. Ageing those
+    #    out raced the retry: the sweep deleted a file the save was committing a
+    #    reference to (caught by test_sweep_and_a_config_write_do_not_race).
+    seed("f4.current.png", "f4.reject.png")
+    live = {"spaces": [_sp("f4", "f4.current.png")]}
+    assert collect(d, live, live) == 0
+    assert (d / "f4.current.png").is_file() and (d / "f4.reject.png").is_file()
+
+    # 6. the same file still referenced by another space is never touched
+    seed("shared.png")
+    assert collect(d, {"spaces": [_sp("a", "shared.png"), _sp("b", "shared.png")]},
+                      {"spaces": [_sp("a", None), _sp("b", "shared.png")]}) == 0
+    assert (d / "shared.png").is_file()
+
+
+def test_attachment_collection_matrix(tmp_path):
+    """Removing an attachment is a trash button; deleting the device is not."""
+    collect = plans.collect_attachments
+
+    def case(name):
+        d = tmp_path / name
+        d.mkdir()
+        return d
+
+    def seed(root, folder, fname, age=None):
+        (root / folder).mkdir(parents=True, exist_ok=True)
+        p = root / folder / fname
+        p.write_bytes(b"x")
+        if age:
+            _aged(p, age)
+        return p
+
+    def cfg(*markers):
+        return {"markers": [
+            {"id": mid, "pdfs": [{"url": f"/api/houseplan/content/files/{mid}/{n}"} for n in names]}
+            for mid, names in markers
+        ]}
+
+    # 1. the user removed one attachment from a device that still exists
+    d = case("dropped")
+    seed(d, "m1", "dropped.pdf")
+    seed(d, "m1", "kept.pdf")
+    assert collect(d, cfg(("m1", ["dropped.pdf", "kept.pdf"])), cfg(("m1", ["kept.pdf"]))) == 1
+    assert not (d / "m1" / "dropped.pdf").exists()
+    assert (d / "m1" / "kept.pdf").is_file()
+
+    # 2. the device itself is gone: its manuals are not ours to throw away
+    d = case("device_gone")
+    seed(d, "m2", "manual.pdf", age=const.SCHEDULED_GRACE_S * 2)
+    assert collect(d, cfg(("m2", ["manual.pdf"])), cfg()) == 0
+    assert (d / "m2" / "manual.pdf").is_file()
+    # and the scheduled pass, later, agrees
+    assert collect(d, cfg(), cfg()) == 0
+    assert (d / "m2" / "manual.pdf").is_file()
+
+    # 3. a dialog that was never saved, in its own staging folder
+    d = case("staging")
+    seed(d, "up_x", "manual.pdf", age=const.PLAN_ORPHAN_TTL_S + 60)
+    assert collect(d, cfg(), cfg()) == 1
+    assert not (d / "up_x").exists()
+
+    # 4. an upload into a live device's folder whose save was rejected: kept,
+    #    for the same reason as a plan's — a retry may be about to reference it
+    d = case("reject")
+    seed(d, "m3", "current.pdf")
+    seed(d, "m3", "rejected.pdf", age=const.SCHEDULED_GRACE_S + 60)
+    live = cfg(("m3", ["current.pdf"]))
+    assert collect(d, live, live) == 0
+    assert (d / "m3" / "current.pdf").is_file()
+    assert (d / "m3" / "rejected.pdf").is_file()
+
+
+def test_only_a_staging_folder_ages_out(tmp_path):
+    """The one age rule left. Everything else waits for the user to say so."""
+    import os
+    import time
+
+    files = tmp_path / "files"
+    (files / "m1").mkdir(parents=True)
+    (files / "up_abandoned").mkdir(parents=True)
+    ancient = time.time() - const.SCHEDULED_GRACE_S * 12
+    hour_ago = time.time() - const.PLAN_ORPHAN_TTL_S - 60
+
+    for path, when in (
+        ((files / "m1" / "ancient.pdf"), ancient),
+        ((files / "up_abandoned" / "manual.pdf"), hour_ago),
+    ):
+        path.write_bytes(b"x")
+        os.utime(path, (when, when))
+
+    cfg = {"markers": [{"id": "m1", "pdfs": []}]}
+    assert plans.collect_attachments(files, cfg, cfg) == 1
+    assert (files / "m1" / "ancient.pdf").is_file(), "age alone is never a reason"
+    assert not (files / "up_abandoned").exists(), "a cancelled dialog goes after an hour"
+
+